Abstract:A collective surface of LiCoO2 is constructed through an interdiffusion reaction of MgHPO4·3H2O. The collective surface renders a three‐layer configuration that demonstrates an amorphous Li3PO4 outmost layer, a spinel‐like layer beneath, and a Mg diffusion layer within LiCoO2 bulk. Consequently, such modified LiCoO2 exhibits ultralong life with capacity retention of 82% after 1000 cycles within 3.0–4.6 V. Rapidly increasing demand for energy density in consumer electronics is eager for developing high‐voltage LiCoO2 (LCO). However, some great challenges such as severe phase transition and surface instability negate the cycle life of LCO operated at high‐voltages (≥4.6 V). Herein, a chemical reconstruction strategy is proposed to form a collective surface of LCO through an interdiffusion reaction of MgHPO4·3H2O (MP) so as to extend the cycle life of high‐voltage LCO. The collective surface renders a three‐layer configuration that demonstrates an amorphous Li3PO4 outmost layer, a spinel‐like layer beneath, and a Mg diffusion layer within LCO bulk. MP with relatively low hardness enables the uniform precoating via mechanical mixing, followed by a sintering process to undergo an interdiffusion reaction. Li3PO4 is an intrinsic electrochemical stabilizer against interfacial side reactions. The spinel‐like compounds build a high‐voltage‐stable surface against irreversible O2 release. In addition, Mg diffuses into the bulk lattice to suppress irreversible phase transition during the deep delithiation of LCO. Therefore, such modified LCO with a collective surface exhibits ultralong life with capacity retention of 82% after 1000 cycles at 1 C within 3.0–4.6 V and stable operating at 4.7 V or elevated temperature (45 °C).

Tuning Surface Reconfiguration for Durable Cathode/Electrolyte Interphase of LiCoO<sub>2</sub> at 45 °C

Tuning Surface Reconfiguration for Durable Cathode/Electrolyte Interphase of LiCoO2 at 45 °C

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

<i>In</i><i>-situ</i> constructed protective bilayer enabling stable cycling of LiCoO<sub>2</sub> cathode at high-voltage

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Double function-layers construction strategy promotes the cycling stability of LiCoO2 under high temperature and high voltage

Tuning Surface Rock‐Salt Layer As Effective O Capture for Enhanced Structure Durability of LiCoO2 at 4.65 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte