Abstract:Calcareous sand erosion under natural environment changes or human activities is a major concern to many coastal zones, where weak and loose calcareous sands are usually encountered. To improve the tensile behavior and structural integrity of such sands, we combine the fiber reinforcement method and the bio-cementation technique based on microbially induced carbonate precipitation (MICP) for calcareous sand treatment. Various fiber-sand mixtures are prepared by mixing calcareous sand with different amount of fibers, including 0.00%, 0.05%, 0.10%, 0.15%, 0.20%, 0.25%, 0.30% and 0.40%, before the bio-cementation process. To investigate the tensile strength as well as the post-peak response, we conduct the direct tensile test on these bio-cemented, fiber-reinforced sand samples. Experimental results highlight the interplay of MICP and fiber inclusions in strengthening microscale inter-particle binding and improving macroscopic tensile behaviors. The tensile strength of the sample increases with the increasing calcium carbonate content. The inclusion of fibers increases the sand ductility, but excessive amount of fibers may cause negative effects on the sand tensile strength due to the possible presence of more micro-voids and the resulting structural heterogeneity. Given varying fiber contents, we identify two types of stress-strain responses under the direct tensile load. With higher fiber content, the overall stress strain response follows four phases, with phase I representing the linear breakage of cemented sand body, phase II responding to the sudden stress drop due to the brittle failure of cemented sand, phase III related to the elastoplastic deformation of fibers, and phase IV for the pull-out or snapping of fibers. In comparison, with lower fiber content, phase III does not exist because of the much higher stress distributed to each individual fiber. Scanned Electron Microscopy observations further reveal that the increasing calcite precipitations strengthen the fiber reinforcement effect and the increasing fibers provide more surfaces that facilitate the calcite precipitations. This study provides new insights into the tensile behavior of bio-cemented, fiber-reinforced sands and contributes to possible future implementations for coastal erosion control.

The Influence of Discrete Fibers on Mechanical Responses of Reinforced Sand in Direct Shear Tests

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Impact of Static Preshearing on Undrained Anisotropy and Shear Characteristics of Sand

Experiment of initial relative density effects on sand strength

Dynamic Shear Behavior of Interface for Clay Reinforced with Geogrid Encapsulated in Thin Layers of Sand

Static liquefaction behavior of saturated fiber-reinforced sand in undrained ring-shear tests

Mechanical Behavior of Cemented Sand Reinforced with Different Polymer Fibers

Liquefaction behavior of fiber-reinforced calcareous sands in unidirectional and multidirectional simple shear tests

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Theoretical and experimental study on multiscale coupled Mohr–Coulomb shear strength criterion of fibre-reinforced sand

Undrained cyclic behaviors of fiber-reinforced calcareous sand under multidirectional simple shear stress path

Shear Fatigue Behavior of Reinforced Concrete Beams Produced with Manufactured Sand As Alternatives for Natural Sand

Mesoscale Numerical Analysis of Fiber-Reinforced Sand with Different Fiber Orientations Subjected to Seepage-Induced Erosion Based on DEM

Effect of particle gradation on static and dynamic direct shear properties of geogrid-sand interface

Measurement of Small Strain Shear Modulus of Clean and Natural Sands in Saturated Condition Using Bender Element Test

Experimental Investigation of the Impact of Blended Fibers on the Mechanical Properties and Microstructure of Aeolian Sand Concrete

Interfacial Shear Strength of Fiber Reinforced Soil

Tensile behavior of bio-cemented, fiber-reinforced calcareous sand from coastal zone

Combined Influences of Cement, Rice Husk Ash and Fibre on the Mechanical Characteristics of a Calcareous Sand

Coupling Effect of Fiber Reinforcement and MICP Stabilization on the Tensile Behavior of Calcareous Sand