Abstract:A new kind of semi-active energy-regenerative suspension system is proposed to recover suspension vibration energy, as well as to reduce the suspension cost and demands for the motor-rated capacity. The system consists of an energy-regenerative damper and a DC-DC converter-based energy-regenerative circuit. The energy-regenerative damper is composed of an electromagnetic linear motor and an adjustable shock absorber with three regulating levels. The linear motor just works as the generator to harvest the suspension vibration energy. The circuit can be used to improve the system’s energy-regenerative performance and to continuously regulate the motor’s electromagnetic damping force. Therefore, although the motor works as a generator and damps the isolation without an external power source, the motor damping force is controllable. The damping characteristics of the system are studied based on a two degrees of freedom vehicle vibration model. By further analyzing the circuit operation characteristics under different working modes, the double-loop controller is designed to track the desired damping force. The external-loop is a fuzzy controller that offers the desired equivalent damping. The inner-loop controller, on one hand, is used to generate the pulse number and the frequency to control the angle and the rotational speed of the step motor; on the other hand, the inner-loop is used to offer the duty cycle of the energy-regenerative circuit. Simulations and experiments are conducted to validate such a new suspension system. The results show that the semi-active energy-regenerative suspension can improve vehicle ride comfort with the controllable damping characteristics of the linear motor. Meanwhile, it also ensures energy regeneration.

Semi-active Vibration Control of the Motorized Spindle Using a Self-Powered SSDV Technique: Simulation and Experimental Study

Dynamic modeling and vibration response analysis of high speed motorized spindle

Piezoelectric Self-Sensing Actuator for Active Vibration Control of Motorized Spindle Based on Adaptive Signal Separation

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

A low-power circuit for piezoelectric vibration control by synchronized switching on voltage sources

Design of Permanent Magnet Synchronous Spindle Motor Control System

Stability Improvement of V/f Control Scheme with Active Damping for Small Capacitor IPMSM Drive System

Improved Synchronized Switch Damping on Negative Capacitances for Semi-Active Vibration Control

The Active Unbalanced Vibration Compensation of the Flexible Switched Reluctance Motorized Spindle

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

Semi-Active Vibration Control for In-Wheel Switched Reluctance Motor Driven Electric Vehicle with Dynamic Vibration Absorbing Structures: Concept and Validation.

Active Control for Unbalanced Vibration Control of Electric Spindle-Tool System

A New Variable Structure Controller for Direct Torque Controlled Interior Permanent Magnet Synchronous Motor Drive

Active Control of Milling Chatter Based on the Built-in Force Actuator

Research on motorized spindle active vibration control based on piezoelectric stack

Active Vibration Control of Motorized Spindle Based on Mixed H∞/Kalman Filter Robust State Feedback Control

Direct Adaptive SSDV Circuit for Piezoelectric Shunt Damping

Active Control for Vehicle Suspension Using a Self-Powered Dual-Function Active Electromagnetic Damper

Enhanced Semi-active piezoelectric vibration control method with shunt circuit by energy dissipations switching

Dynamic Performance Analysis of Semiactive Vehicle ISD Suspension Based on the Power-Driven-Damper Strategy

Design and experiment study of a semi-active energy-regenerative suspension system