Abstract:Purpose This paper aims to present a compact, broadband substrate integrated waveguide (SIW) three-way power divider with improved isolation based on six-port SIW coupler. Design/methodology/approach The power coupling among the three output ports occurs due to short openings in the narrow walls of the central SIW channel. Performance improvement in the isolation and return loss among ports is achieved using matching posts placed at the input and output ends of the coupling region. This enhances the coupling between TE10 and TE30 modes. The input matching ports enhance the return loss, whereas the isolation is alleviated by both the input and output matching posts. The bandwidth enhancement is achieved by optimizing the outer SIW channel widths. Findings The measured fractional bandwidth of 27.3% with over 15 dB of isolation and return loss is achieved. The coupling length is 1.55 λg at the centre frequency. The power divider achieves better than 15 dB isolation between non-adjacent output ports. The measured reflection and isolation coefficients are in close agreement with simulated results over 8.2 to 10.8 GHz. Practical implications Isolation between the adjacent and non-adjacent ports is an important parameter as the reflections from these ports will interfere with signals from other ports reducing the fractional bandwidth of the power divider and affecting the overall performance of the transmitters and receivers. Originality/value The authors present the enhancement of isolation between the output non-adjacent ports by optimizing the SIW channel width and matching post in the coupling region to reduce the reflected signals from non-adjacent ports entering into other ports. To the author’s knowledge, this is the only SIW three-way power divider paper showing non-adjacent port isolation among six-port couplers based three-way power dividers.

Ka-band Wide-Isolation-Bandwidth Waveguide Power Divider Using Microstrip-Probe Isolation Circuit

Wideband Out-Of-Phase Power Dividers With Improved Isolation Performance

A Half-Mode Substrate Integrated Waveguide Ring for Two-Way Power Division of Balanced Circuit

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A BROADBAND OUT-OF-PHASE POWER DIVIDER FOR HIGH POWER APPLICATIONS USING THROUGH GROUND VIA (TGV)

An Isolated Out-of-Phase 3-dB Power Divider via Waveguide-to-Microstrip Transition

Wideband Gysel HMSIW Power Divider with High Power-Handling Capability

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

An improved wideband three‐way waveguide power divider based on directional coupler for Ku band application

A Broadband 3-Way Power Divider Based on Gap Waveguide for Ka-Band Applications

W-band Power Divider Based on H-plane Slot Waveguide Bridge

Compact coaxial-waveguide four-way power divider with low insertion loss and high output isolation

A Waveguide Power Divider/combiner Using Microstrip E-plane Dual-Probe Structure

Wideband Half-Mode SIW Power Divider With Improved Output Isolation Using Slotline Isolation Technology

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

A tri-band Wilkinson power divider using extended T-shaped stubs

A compact, broadband three-way substrate integrated waveguide power divider with improved isolation

Four-way Wideband Power Divider Using a Hybrid HMSIW/microstrip Line

A Novel Compact Wideband Four-Way W-Band Waveguide Power Divider with Low Insertion Loss

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

A Design of Wide-Band and High-Isolation Power Divider