Abstract:Sr has been widely used to convert the faceted needle-like eutectic Si to fibrous Si particles for producing automotive engines, pistons, and wheels made of Al–Si–Cu alloys. However, its application to recycled Al–Si–Cu alloys has not been investigated in details, especially how needle-like Fe-rich intermetallics can transformed into less harmful phases. In this study, the influence of minor additions at 0.015 and 0.03 wt% Sr has been quantified by using X-ray computed tomography (XCT) at a micrometer resolution. It has been found that half of the needle-like β-Fe intermetallics have transformed into a compact α -Fe phase as a result of 0.015 wt% Sr addition. Further increasing the Sr level to 0.03 wt% resulted in the majority of the needle-like phases transforming into less harmful crystal structures including fibrous Si and blocky α -Fe, leading to an increase in elongation by 90.47%. In addition, the first-principles calculations have shown that Sr has a strong affinity to vacancy and interfaces, prohibiting the nucleation of eutectic Si and porosity. Therefore, the porosity number density decreased from 274.72 to 91.26 mm −3 , and the eutectic Si number density increased from 13,061.27 to 42,449.13 mm −2 . First-principles calculations and quantification of blocky Fe-rich intermetallics replacing needle-like morphology as a function of Sr addition uncover that Sr–Al–Si co-segregation to the low interfacial energy α -Al/Fe-rich intermetallics interface cut the diffusion path of Fe along faceted planes at elevated temperature, promoting twinning by alternating stacking sequences along the high Miller index planes.

Selective Etching of Sr-Modified and Directionally Solidified Industrial Al–Si Eutectic Alloys for Fabricating Fibrous Eutectic Si

Effects of Sr on Electrochemical Corrosion Behaviors of Al-Si Alloy

Eutectic Solidification in Near-eutectic Al-Si Casting Alloys

Eutectic Growth in Sr Modified Al–13%Si Alloy under Unidirectional Solidification

Effects of Si Phase Refinement on the Plasma Electrolytic Oxidation of Eutectic Al-Si Alloy

Effects of Sr Modification on Microstructure of Al-Si Alloy

Effects of Strontium, Magnesium Addition, Temperature Gradient, and Growth Velocity on Al–Si Eutectic Growth in a Unidirectionally-solidified Al–13 Wt% Si Alloy

Improved Corrosion Behavior of Ultrafine-Grained Eutectic Al-12Si Alloy Produced by Selective Laser Melting

Effect of Sc and Sr on the Eutectic Si Morphology and Tensile Properties of Al-Si-Mg Alloy

Synergistic Effects of Cr and Sr Addition on the Mechanical and Corrosion Properties of A356.2 Alloy

New Method of Eutectic Silicon Modification in Cast Al–Si Alloys

Effect of Strontium Addition on Silicon Phase and Mechanical Properties of Zn–27Al–3Si Alloy

Microstructure and Surface Characterization of a Selectively Dissolved Ni–Ni3Si Eutectic Alloy

Effect of Al-5Ti-1B on the microstructure of near-eutectic Al-13.0%Si alloys modified with Sr

The Effect of Sr Modification on the Microstructure and Properties of Mg2si Reinforced Near- Eutectic Al-Si Alloy

Simultaneous Refinement of Primary Si and Modification of Eutectic Si in A390 Alloy Assisting by Sr-Modifier and Serpentine Pouring Channel Process

Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al–12.7%Si alloys investigated by SEM/EBSD

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

A Selective Laser Melting and Solution Heat Treatment Refined Al–12Si Alloy with a Controllable Ultrafine Eutectic Microstructure and 25% Tensile Ductility

Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy

Effects of Sr on Fe-rich intermetallics in recycled Al–Si–Cu alloys