Abstract:Due to the extensive application of Al-Si alloys in the automotive and aerospace industries as structural components, an understanding of their microstructural formation, such as dendrite and（Al+Si） eutectic, is of great importance to control the desirable microstructure, so as to modify the performance of castings. Since previous major themes of microstructural simulation are dendrite and regular eutectic growth, few efforts have been paid to simulate the irregular eutectic growth. Therefore, a multiphase cellular automaton（CA） model is developed and applied to simulate the time-dependent Al-Si irregular eutectic growth. Prior to model establishment, related experiments were carried out to investigate the influence of cooling rate and Sr modification on the growth of eutectic Si. This CA model incorporates several aspects, including growth algorithms and nucleation criterion, to achieve the competitive and cooperative growth mechanism for nonfaceted-faceted Al-Si irregular eutectic. The growth kinetics considers thermal undercooling, constitutional undercooling, and curvature undercooling, as well as the anisotropic characteristic of eutectic Si growth. The capturing rule takes into account the effects of modification on the silicon growth behaviors.The simulated results indicate that for unmodified alloy, the higher eutectic undercooling results in the higher eutectic growth velocity, and a more refined eutectic microstructure as well as narrower eutectic lamellar spacing. For modified alloy, the eutectic silicon tends to be obvious fibrous morphology and the morphology of eutectic Si is determined by both chemical modifier and cooling rate. The predicted microstructure of Al-7Si alloy under different solidification conditions shows that this proposed model can successfully reproduce both dendrite and eutectic microstructures.

Eutectic Growth in Sr Modified Al–13%Si Alloy under Unidirectional Solidification

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Effect of Sr Modification on the Microstructures, Mechanical Properties, and Thermal Conductivity of Hypoeutectic Al-13.6Cu-6Si Alloys

Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

Ternary eutectic growth and associated tensile properties of directionally solidified Al87Si11Ni2 alloy

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Influence of Super-Gravity Coefficient on Spatial Distribution of Solidification Structure in Al-14.5Si Alloys

Combined Treatment of Sr and B and Evaluation of Refinment-Modification Levels for Al-7si Casting Alloy

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Study on the Eutectic Modification Level of Al–7Si Alloy by Computer Aided Recognition of Thermal Analysis Cooling Curves

Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys

Modeling of Aluminum-Silicon Irregular Eutectic Growth by Cellular Automaton Model

Modification of Eutectic Si in Al–Si Alloys with Eu Addition

Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al-Si alloy

Effects of Sb, Sr, and Bi on the material properties of cast Al-Si-Cu alloys produced through heated mold continuous casting

New Method of Eutectic Silicon Modification in Cast Al–Si Alloys

Analysis of Fe-, Cu-, Mg- and Sr-Based Phases in Al–Si Alloys: Role of P Addition

Effects of Zr and Sr on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg alloy

Effects of Strontium Impurity on the Structure and Dynamics of Al88si12 Liquid

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys