Abstract:Al-Si alloys have been widely used in electronic information, communication and other fields because of their high specific strength, excellent castability and good thermal conductivity. In recent years, with the rapid development of 5G communication technology, electronic communication equipment is gradually developing towards high integration and lightweight. The power of related equipment is higher and higher, which puts forward higher requirements for thermal conductivity and mechanical properties of materials. Si can improve the fluidity and strength of the Al-Si alloy, but a large amount of Si will aggravate the lattice distortion and promote the increase of eutectic Si. This will reduce the plasticity of the alloy, increase the electron scattering and reduce the thermal conductivity. In order to improve the mechanical properties and thermal conductivity of Al-Si alloys, chemical inoculation is generally used. Sr is usually used as modifier and Al-B is as grain refiner. However, the simultaneous addition of Sr and B in Al-Si alloy results in "poisoning" phenomenon, it is impossible to refine α- Al grains and modified eutectic Si simultaneously. In recent years, rare earth La has attracted more and more attention in improving the properties of aluminum alloys. However, previous studies have mainly focused on the effects of La addition, the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy is lack. In this work, solidification experiments were performed to investigate the effects of combined addition of La, Sr, B on the microstructure and properties of Al-7Si-0.6 Fe alloy. The results show that the addition of trace rare earth La can effectively eliminate the poisoning effect of Sr and B, and enhance the modification effect of eutectic Si. Besides, La addition can promote the formation of α-Al heterogeneous nucleation substrate LaB6 and La can be used as a surfactant to reduce the undercooling of α-Al nucleation, thus it refines α-Al grains. The thermal conductivity of the alloy is significantly improved when the addition of La ranges from 0.02% to 0.06%, with the further increase of La addition, LaAlSi intermetallic compounds are formed in the alloy, leading to a decrease in the thermal conductivity of the alloy.

Combined Treatment of Sr and B and Evaluation of Refinment-Modification Levels for Al-7si Casting Alloy

Study on the Eutectic Modification Level of Al–7Si Alloy by Computer Aided Recognition of Thermal Analysis Cooling Curves

Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy

Effect of Sr Modification on the Microstructures, Mechanical Properties, and Thermal Conductivity of Hypoeutectic Al-13.6Cu-6Si Alloys

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

Effects of Refinement and Modification on Melt Structure of Hypoeutectic Al-Si Alloy

Effects of Strontium and Boron Interactions in Al-7si Alloys

Grain refinement and eutectic modification of A356 casting alloy by adding Al-B-Sr master alloys and its effect on tensile properties

Effect of trace rare earth La on microstructure and properties of Al-7Si-0.6 Fe alloy

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Influence of Alloying Element Mg on Na and Sr Modifying Al-7Si Hypoeutectic Alloy

Effect of Sr modification on microstructure and thermal conductivity of hypoeutectic Al−Si alloys

Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting

Effect of Scandium on Grain refinement mechanism and Mechanical Properties of Al-7Si-0.6Mg alloy at Different Cooling Rates

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

Influence of minor addition of La and Ce on the ageing precipitation behavior of Sr-modified Al-7Si-0.6Mg alloy

The Influence of the Combined Addition of La–Ce Mixed Rare Earths and Sr on the Microstructure and Mechanical Properties of AlSi10MnMg Alloy

New Method of Eutectic Silicon Modification in Cast Al–Si Alloys

Incubation and Fading of Sr Modification in Hypoeutectic Al-Si Alloys

Effect of Bi and Ca on the Solidification Parameters of Sr-Modified Al-S-Cu (Mg) Alloys