Abstract:A feasible strategy for dual‐bulk doping with Al and Nb in ultrahigh‐Ni oxide cathode materials of LiNi0.96Co0.04O2 (NC) is designed to stabilize the bulk structure, suppress oxygen release, and achieve superior electrochemical performance. This study offers a practical perspective for the development of high‐energy‐density and long‐life Li‐ion batteries. The pursuit of high energy densities propels the design of next‐generation nickel‐based layered oxide cathodes. The utilization of low‐cobalt, ultrahigh‐nickel layered oxide cathodes, and the extension of operating voltages promise enhanced energy density. However, stability and safety face challenges associated with nickel content, including structural degradation, lattice oxygen evolution, and thermal instability. In this study, a promising strategy of Al and Nb dual‐bulk‐doping is presented in high‐Ni cathode materials of LiNi0.96Co0.04O2 (NC) to stabilize the bulk structure, suppress oxygen release, and attain superior electrochemical performance at high voltages. The introduction of Al and Nb effectively raises the migration energy of Ni2+ into Li sites and stabilizes lattice oxygen through strengthened Al─O and Nb─O bonds. Furthermore, the substitution of high‐valence Nb ions reduces the charge depletion of lattice oxygen and induces an ordered microstructure. The Al and Nb dual‐bulk‐doping strategy mitigates strain and stress associated with the H2↔H3 phase transition, reducing the generation and propagation of microcracks. The resulting Li(Ni0.96Co0.04)0.985Al0.01Nb0.005O2 (NCAN) cathode exhibits superior cycling stability, with a capacity retention of 77.8% after 300 cycles, even when operating at a high‐voltage of 4.4 V, outperforming the NC (48.5%). This work provides a promising perspective for developing high‐voltage and high‐Ni cathode materials.

Enhanced Interfacial Stability of Ni-rich Cathode for Li-ion Batteries Towards Excellent High-Voltage Performance

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Ultrahigh‐Ni Cathode with Superior Structure Stability Enabled by a Covalent Bonding Strategy

Pre-Deoxidation of Layered Ni-Rich Cathodes to Construct a Stable Interface with Electrolyte for Long Cycling Life

Enhancing the structural stability of Ni-rich layered oxide cathodes with a preformed Zr-concentrated defective nanolayer.

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Enhancing Structural Rigidity of Ultrahigh‐Ni Oxide Through Al and Nb Dual‐Bulk‐Doping for High‐Voltage Lithium‐Ion Batteries

Engineering a Robust Interface on Ni-Rich Cathodes via a Novel Dry Doping Process toward Advanced High-Voltage Performance

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries

Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage

Collaboratively enhancing electrochemical properties of LiNi0.83Co0.11Mn0.06O2 through doping and coating of quadrivalent elements

Reducing structural degradation of high-voltage single-crystal Ni-rich cathode through in situ doping strategy

Enhancing cyclic and in-air stability of Ni-Rich cathodes through perovskite oxide surface coating

Advancing Lithium-Ion Batteries' Electrochemical Performance: Ultrathin Alumina Coating on Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials

Enhanced High-Voltage Cycling Stability of Ni-rich LiNi0.8Co0.1Mn0.1O2 Cathode Coated with Li2O–2B2O3

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Enhancing high-voltage structural stability of single-crystalline Ni-rich LiNi0.9Mn0.05Co0.05O2 cathode material by ultrathin Li-rich oxide layer for lithium-ion batteries