Abstract:This study explores the enhancement of hydrogen production via dry reforming of methane (DRM) using nickel catalysts supported on metalized silica-alumina. By incorporating noble metals (Ir, Pd, Pt, Ru, and Rh), we significantly improve the catalysts' reducibility, basicity, and resistance to coke deposition. Our novel approach integrates a predictive model combining advanced statistical and experimental techniques to optimize catalyst performance. The active site population derived from the reduction of the NiAl 2 O 4 phase is found to be stable and least affected under oxidizing gas stream (CO 2 ) as well as reducible gas stream (H 2 ) during the DRM reaction. The catalyst system is characterized by surface area and porosity, X-ray diffraction, Raman spectroscopy, thermogravimetry analysis, XPS, TEM, and various temperature-programmed reduction/desorption techniques (TPR/CO 2 -TPD). Notably, the 5Ni/1IrSiAl catalyst shows reduced activity due to low reducibility and basicity, whereas the 5Ni/1RhSiAl catalyst demonstrates superior performance, achieving a hydrogen yield of 62% at 700 °C and 80% at 800 °C after 300 minutes. This enhancement is attributed to the highest edge of reducibility, the maximum concentration of stable active sites "Ni" (derived from NiAl 2 O 4 during the DRM reaction), and the optimum concentration of moderate strength basic sites. Through the application of multiple response surface methodology and central composite design, we developed a predictive model that forecasts the optimal conditions for maximizing hydrogen yield, which was experimentally validated to achieve 95.4% hydrogen yield, closely aligning with the predicted 97.6%. This study not only provides insights into the mechanistic pathways facilitated by these catalysts but also demonstrates the efficacy of computational tools in optimizing catalytic performance for industrial applications.

Experimental and DFT Studies on Diesel-Steam-reforming to Hydrogen over a Bimetallic Rh–Ni-based MgO-Al2O3 Microsphere Catalyst

Experimental and Dft Studies on Diesel-Steam-Reforming to Hydrogen over a Bimetallic Rh–Ni Microsphere Catalyst

Effect of characteristic component on diesel steam reforming to hydrogen over highly dispersed Ni-Rh- and Ni-based catalysts: Experiment and DFT calculation study

Enhanced Hydrogen Production from Steam Reforming of Vegetable Oil over Bimodal ZrO2-SiO2 Supported Ni Catalyst

Diesel reforming to hydrogen over the mesoporous Ni-MgO catalyst synthesized in microfluidic platform

Hydrogen Production Via Model Diesel Steam Reforming over a High-Performance Ni/Ce0.75La0.25O2−δ-γ-Al2O3 Catalyst with Oxygen Vacancies

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Rh Doping Effect on Coking Resistance of Ni/SBA-15 Catalysts in Dry Reforming of Methane

Integrating advanced fitting models with experimental catalysis to maximize H2 production in dry reforming using nickel on metalized-silica-alumina catalysts

Hydrotreating of diesel fuel over in-situ nickel modified Y zeolite supported Ni-Mo-S catalyst

Numerical Simulation and Experimental Study on Commercial Diesel Reforming over an Advanced Pt/Rh Three-Way Catalyst

Ni-based bimetallic catalysts for hydrogen production via (sorption-enhanced) steam methane reforming

The effect of hydroxyl and metal synergetic structures on the FCC diesel hydrotreating performance of NiMo/Al 2 O 3 catalysts

Inhibition of Sintering and Coking by Post-Coating Group IIA Metal Oxides on Trace-Rh-promoted Ni-based Catalysts for High-Temperature Steam Reforming

Synthesis of Ni-Co Catalysts Supported on Flower-like MgAl Composite Oxide for Hydrogen Production by <i>n</i>-Dodecane Steam Reforming

Methane Dry Reforming over Ni/NiO Supported on Ce-, Zr-, and Al-Modified Y2O3 for Hydrogen Production

Controlling Sintering and Carbon Deposition with Post-Coated MgO Confined Group VIII Metal-Based Catalysts Towards Durable High-Temperature Steam Reforming

Fine-tuning of Pd-Rh core-shell catalysts by interstitial hydrogen doping for enhanced methanol oxidation

A strong bimetal-support interaction in ethanol steam reforming

Pursuing Complete and Stable Steam Reforming of N-Dodecane over Nickel Catalysts at Low Temperature and High LHSV

Co–Ni Alloy Supported on CeO2 As a Bimetallic Catalyst for Dry Reforming of Methane