Abstract:Ni-based catalysts dispersed on different supports (MgO-α-AlO, CeO, SBA-15, and MgO-SBA-15) were prepared by the impregnation method. Characteristics of the catalysts, including specific surface areas (N physisorption), crystalline phase compositions (powder X-ray diffraction, Raman spectroscopy), reducibility (hydrogen temperature-programmed reduction, H-TPR), and morphology (scanning electron microscopy (SEM) and transmission electron microscopy, TEM)) were investigated. The activity and stability of the catalysts were tested for the combined steam and CO reforming of methane at 700 °C in a microflow system. The results show that the catalysts exhibit high activity in the BRM reaction. At 700 °C, the conversion of CH and CO reached 86-99% and 67-80%, respectively, in which the Ni/Mg-SBA catalyst is the best with conversions of CH and CO reaching 99% and 80%. Coke accumulation on the surface of the catalysts for 100 h time on stream (TOS) was evaluated by the temperature-programmed oxidation (TPO) technique. The major cause of the catalytic deactivation was elucidated by combining the determination of the amount and type of deposited coke with the changes in the physicochemical properties of the catalysts after the long-term reaction. Almost complete loss of activity was observed on Ni/Mg-Al catalyst after 100 h TOS, while the activity drop was slow on the Ni/Mg-SBA sample, about 15-20% of the total value. Otherwise, the Ni/CeO and Ni/SBA catalysts firmly retained their stable activity for 100 h TOS due to the minimal carbon deposition and stability of these catalysts' structure. The highly considerable formation of inert C carbon and sintering over Ni catalyst supported on MgO-α-AlO were responsible for the lower stability of this catalyst compared to those supported on CeO and SBA-15.

Inhibition of Sintering and Coking by Post-Coating Group IIA Metal Oxides on Trace-Rh-promoted Ni-based Catalysts for High-Temperature Steam Reforming

Controlling Sintering and Carbon Deposition with Post-Coated MgO Confined Group VIII Metal-Based Catalysts Towards Durable High-Temperature Steam Reforming

Self-Confinement Created for a Uniform Ir–Ni/SiO2 Catalyst with Enhanced Performances on CO2 Reforming of Methane

Influence of Sulfur on the Carbon Deposition in Steam Reforming of Liquid Hydrocarbons over CeO2–Al2O3 Supported Ni and Rh Catalysts

Coke-resistance over Rh–Ni bimetallic catalyst for low temperature dry reforming of methane

Effect of Support on Stability and Coke Resistance of Ni-Based Catalyst in Combined Steam and CO Reforming of CH.

Rh Doping Effect on Coking Resistance of Ni/SBA-15 Catalysts in Dry Reforming of Methane

Mesoporous Silica Encapsulated Core-Shell NiRh@NiO Nanocatalyst for Performance-Enhanced Ethanol Steam Reforming

Pursuing Complete and Stable Steam Reforming of N-Dodecane over Nickel Catalysts at Low Temperature and High LHSV

Effect of Ceria Amount on Promoting Ni-Co/SBA-15 Catalyst for n-Dodecane Steam Reforming

Experimental and DFT Studies on Diesel-Steam-reforming to Hydrogen over a Bimetallic Rh–Ni-based MgO-Al2O3 Microsphere Catalyst

Developing Silicalite-1 Encapsulated Ni Nanoparticles as Sintering-/Coking-Resistant Catalysts for Dry Reforming of Methane

Catalytic performance of Ni catalysts for steam reforming of methane at high space velocity

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Effect of the Calcination Temperature of LaNiO3 on the Structural Properties and Reaction Performance of Catalysts in the Steam Reforming of Methane

Noble metal (Pt, Pd and Rh) promoted Ni-Co/Mg(Al)O catalysts for steam reforming of tar impurities from biomass gasification

Co-precipitation Continuous Synthesis of the Ni-Rh-Ce0.75Zr0.25O2-δ Catalyst in the Membrane Dispersion Microreactor System for N-Dodecane Steam Reforming to Hydrogen

Enhancing coking resistance of nickel-based catalysts for dry reforming of methane via nitric oxide abatement: a support study

Modulating oxidation state of Ni/CeO<sub>2</sub> catalyst for steam methane reforming: a theoretical prediction with experimental verification

Anti-Coking and Anti-Sintering Ni/Al2O3 Catalysts in the Dry Reforming of Methane: Recent Progress and Prospects

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4