Abstract:Dry methane reforming (DRM) represents a highly promising approach to greenhouse gas conversion (CO 2 and CH 4 ) to valuable byproducts. However, severe carbon deposition and catalyst deactivation inhibit large-scale applications. The work designed new catalysts with a yolk-shell structure using the water-in-oil microemulsion method. The catalysts were composed of a yolk-shell structure, with Ni-M as the active point and silica as the shell. The catalytic performance evaluation indicates that the Ni-M @SiO 2 catalysts show higher CH 4 and CO 2 conversion compared with the Ni@SiO 2 and conventional catalysts at 750 °C, suggesting the yolk-shell structure and added M species enhance the DRM activity. The XRD, HRTEM, XPS, BET, H 2 -TPR, and CO 2 -TPD analysis confirmed the existence of yolk-shell configuration and evident electronic effect among Ni, M species, and SiO 2 . The long term measurements indicate that the added M species also bring higher carbon deposition tolerance for DRM, where Ni-Ce@SiO 2 and Ni-Zr@SiO 2 exhibit good structural and catalytic stability for DRM over 100 h. Through XRD, TEM, and TGA characterizations of the exhausted catalysts, it is determined that the coke deposition resistance of the catalyst is improved as a result of increased oxygen mobility and enhanced Ni dispersion on the catalytic surface, both of which are enhanced by the added Ce species. The structural analysis of the spent catalysts indicates that the tolerance of carbon deposition is improved by the yolk-shell samples. This study can offer valuable insights for the development of Ni-based catalysts with exceptional carbon deposition capability for DRM.

Controlling Sintering and Carbon Deposition with Post-Coated MgO Confined Group VIII Metal-Based Catalysts Towards Durable High-Temperature Steam Reforming

Inhibition of Sintering and Coking by Post-Coating Group IIA Metal Oxides on Trace-Rh-promoted Ni-based Catalysts for High-Temperature Steam Reforming

Achieving strong thermal stability in catalytic reforming of methanol over in-situ self-activated nano Cu2O/ZnO catalyst with dual-sites of Cu species

Preparation of a Durable CuO/ZnO/CeO2/ZrO2 Catalyst on an SiC Support by an Inverse Microemulsion/Precipitation Method for Methanol Steam Reforming

Highly Coke Resistant Mg- Ni/ Al2O3 Catalyst Prepared Via a Novel Magnesiothermic Reduction for Methane Reforming Catalysis with CO2: the Unique Role of Al- Ni Intermetallics

Carbon Dioxide Reforming of Methane over Promoted NixMg1−xO (111) Platelet Catalyst Derived from Solvothermal Synthesis

Co-precipitation Continuous Synthesis of the Ni-Rh-Ce0.75Zr0.25O2-δ Catalyst in the Membrane Dispersion Microreactor System for N-Dodecane Steam Reforming to Hydrogen

Experimental and DFT Studies on Diesel-Steam-reforming to Hydrogen over a Bimetallic Rh–Ni-based MgO-Al2O3 Microsphere Catalyst

Remarkable Basic-Metal Oxides Promoted Confinement Catalysts for CO2 Reforming

High-performance Cu/ZnO/Al2O3 catalysts for methanol steam reforming with enhanced Cu-ZnO synergy effect via magnesium assisted strategy

Improving the Anti-Coking Ability in the Ni-M(M = Ce, Zr, Co)@SiO2 Yolk-Shell Catalysts for Dry Reforming of Methane

Formation of a Porous Crystalline Mg1‒ x Al2O y Overlayer on Metal Catalysts via Controlled Solid‐State Reactions for High‐temperature Stable Catalysis

Dissecting ZnO X /Cu interfacial self-encapsulation and methanol-induced strong metal-support interaction of the highly active alloyed CuZn and ZnO for methanol steam reforming

Gallium-Promoted Strong Metal–Support Interaction over a Supported Cu/ZnO Catalyst for Methanol Steam Reforming

Study of the Metal-Support Interaction and Electronic Effect Induced by Calcination Temperature Regulation and Their Effect on the Catalytic Performance of Glycerol Steam Reforming for Hydrogen Production

Improving the anti-coking ability in the Ni-M(M = Ce, Zr, Co)@SiO 2 yolk-shell catalysts for dry reforming of methane

Hollow Hierarchical Ni/MgO-SiO2 Catalyst with High Activity, Thermal Stability and Coking Resistance for Catalytic Dry Reforming of Methane

Methane steam reforming for hydrogen production using low water-ratios without carbon formation over ceria coated Ni catalysts

Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal

Synergy Effect of MgO and ZnO in a Ni/Mg–Zn–Al Catalyst During Ethanol Steam Reforming for H2-rich Gas Production

Effect of Ceria Amount on Promoting Ni-Co/SBA-15 Catalyst for n-Dodecane Steam Reforming