Abstract:Nowadays the development of high-field magnets strongly relies on the performance of superconducting materials. Iron-based superconductors exhibit high upper critical fields and low electromagnetic anisotropy, making them particularly attractive for high-field applications, especially in particle accelerator magnets, nuclear magnetic resonance spectrometers, medical magnetic resonance imaging systems and nuclear fusion reactors. Herein, through an industrially scalable and cost-effective manufacturing strategy, a practical level critical current density up to 1.1x10^5 A/cm2 at 4.2 K in an external magnetic field of 10 T was achieved in Cu/Ag composite sheathed Ba0.6K0.4Fe2As2 superconducting tapes. The preparation strategy combines flat rolling to induce grain texture and a subsequent hot-isostatic-pressing densification. By varying the parameters of rolling, the degree of grain texture was engineered. It is found that the transport properties of the Ba1-xKxFe2As2 tapes can be enhanced by applying a large amount of deformation during rolling, which can be attributed to the improved degree of c-axis texture. Microstructure characterizations on the highest-performance tape demonstrate that the Ba1-xKxFe2As2 phase has a uniform element distribution and small grains with good connectivity. Grain boundary pinning is consequently enhanced as proved by large currents circulating through the sample even at 25 K. Our work proves that Cu/Ag composite sheathed Ba1-xKxFe2As2 superconducting tapes can be a promising competitor for practical high-field applications in terms of the viable, scalable and cost-effective fabrication strategy applied and the high transport properties achieved in this work.

Effect of Bending Before Annealing on Current-Carrying Properties of Iron-Based Superconducting Tapes

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

The effect of post-annealing on the critical current recovery of bending-deformed (Bi,Pb)-2223/Ag tapes

Interface effects on current transport properties in multi-layered (Ba, K)Fe2As2 superconducting wires

High-performance Ba1-xKxFe2As2 superconducting joints for persistent current operation

Properties of seven-filament Cu/Ag-sheathed (Ba,K)Fe2As2 tapes fabricated from round and square wires

Low field anomaly in the critical current of Ba1‐xKxFe2As2 tapes

Enhanced mechanical strength and texture of (Ba,K)Fe 2 As 2 Cu/Ag composite sheathed tapes with Nb barrier layer

High-performance Ba1-xKxFe2As2 superconducting tapes with grain texture engineered via a scalable and cost-effective fabrication

Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density

High transport Jc in magnetic fields up to 28 T of stainless steel/Ag double sheathed Ba122 tapes fabricated by scalable rolling process

Role of heat and mechanical treatments in the fabrication of superconducting Ba0.6K0.4Fe2As2 ex-situ Powder-In-Tube tapes

The Influence of Tape Arrangements on the Critical Current of Bi-2223 Superconducting Current Leads

STUDY ON THE PERFORMANCES OF SEVERAL LAMINATED Bi-2223/Ag HIGH TEMPERATURE SUPERCONDUCTOR TAPE COMPOSITE STRUCTURES

Study on Performance Degradation of Multi-Layer Spiral Superconducting Cable Under Bending Load

Experimental study on the an-isotropic critical current of REBCO tape

Characterization of I-c Degradation in Bent YBCO Tapes

Superconducting joint between iron-based superconductor tapes

Strongly enhanced current densities in Sr0.6K0.4Fe2As2 superconducting tapes

Strain effect in MgB2/stainless steel superconducting tape