Abstract:This paper demonstrates a narrow-linewidth fiber laser with near-diffraction-limited beam quality and high Raman suppression ratio by utilizing Master Oscillator Power-Amplifier structure based on narrow-bandwidth fiber Bragg gratings. The output power reaches 3.31 kW with a slope efficiency of 85.0 %. At the maximum output power, the 3 dB, 10 dB, and 20 dB linewidths are 0.40 nm, 1.20 nm, and 3.09 nm, respectively. The beam quality M2 factor is 1.32 and the Raman suppression ratio reaches 26.3 dB. A pair of narrow-bandwidth fiber gratings were used in the oscillator to compress the linewidth of the seed laser. We used backward-pumping configuration and plum-coiled gain fiber in the amplification stage to suppress the Raman effect and select transverse mode by fiber-bending. Finally, a compact all-fiber laser was obtained with narrow-linewidth, high beam quality, and effective suppression of the Raman effect. To the best of our knowledge, this is the highest output power for a sub-nanometer-linewidth laser using narrow-bandwidth fiber gratings and none-wavelength-locked laser diodes, which achieves near-diffraction-limit beam quality. This provides a solution for high-power narrow-linewidth laser sources with high beam quality.

3 Kw Power-Level All-Fiberized Superfluorescent Fiber Source with Linear Polarization and Near-Diffraction-limited Beam Quality

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High-power all-fiber superfluorescent source with fused angle-polished side-pumping configuration.

Tapered active fiber simultaneously enabled 141 W high average and 1.3 MW high peak power via all-fiber and polarization-maintained picosecond amplifier

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

All-fiber high-power linearly polarized supercontinuum generation from polarization-maintaining photonic crystal fibers

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

A 3.5-kW near-single-mode oscillating–amplifying integrated fiber laser

Incoherently pumped high-power linearly-polarized single-mode random fiber laser: experimental investigations and theoretical prospects

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

3.38 kW all-fiberized narrow linewidth fiber laser based on active polarization control using RMS-Prop algorithm

High-Power GHz Burst-Mode All-Fiber Laser System with Sub 300 fs Pulse Duration

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

High-power, 474 Fs, 31.12 MHz, All-Polarization-maintaining, 1560 Nm Fiber Laser System Based on the Chirped-Pulse Amplification

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

High-power single-stage thulium-doped superfluorescent fiber source

High Peak Power and High Beam Quality Fiber-Solid Hybrid Amplification Laser System

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality