Abstract:When designing a fiber laser, it is difficult to achieve both narrow linewidth and high power due to nonlinear effects, especially stimulated Brillouin scattering (SBS). However, using the pseudo-random binary sequence (PRBS) phase modulation technique, SBS can be effectively suppressed in narrow-linewidth fiber lasers during amplification. In light of this, we carried out the experimental research described in this paper. First, based on a theoretical analysis, a narrow-linewidth linearly polarized pulsed fiber laser system was designed; then, an experimental platform of a multistage master-oscillator power amplifier (MOPA) structure was constructed, including one-stage continuous optical amplification and four-stage pulsed optical amplification. In our experiments, without phase modulation, a linearly polarized narrow-linewidth fiber laser achieved an average power output of 17 W and a peak power of 188 kW (repetition frequency of 10 kHz, pulse width of 8.5 ns). At this level of power, the spectral signal-to-noise ratio was about 40 dB, and the beam transmission factors in the X and Y directions were 1.14 and 1.11, respectively. Using PRBS phase modulation, a linearly polarized narrow-linewidth pulsed laser achieved an average power output of 30 W and a peak power of 376 kW (repetition frequency of 10 kHz, pulse width of 7.5 ns) at a clock rate of 1.25 GHz. The polarization extinction ratio was greater than 15 dB, the spectral signal-to-noise ratio was greater than 40 dB, and the beam transmission factors in the X and Y directions were 1.18 and 1.12, respectively.

3.38 kW all-fiberized narrow linewidth fiber laser based on active polarization control using RMS-Prop algorithm

65 GHz Linearly Polarized Kilowatt Fiber Amplifier Based on Active Polarization Control

Linearly Polarized Fiber Amplifier with Narrow Linewidth of 5 Kw Exhibiting a Record Output Power and Near-Diffraction-limited Beam Quality.

A 376 kW narrow-linewidth pulsed fiber laser based on PRBS

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Narrow-linewidth Single-Polarization Fiber Laser Using Non-Polarization Optics.

Narrow-linewidth high-efficiency single-frequency ytterbium-doped fiber laser with highly linear polarization at 1064 nm

Polarization Extinction Ratio Promotion in High-Power Linearly Polarized Fiber Lasers

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

109 W Khz-Linewidth One-Stage All-Fiber Linearly-Polarized MOPA Laser at 1560 Nm

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

All Polarization-Maintain Fiber Mode-Locked Laser Based on Nonlinear Polarization Evolution

Nanosecond pulse pumped, fiber-integrated narrow linewidth linearly polarized Raman amplifier at 1120 nm

All-Polarization-Maintaining Linear Cavity Fiber Lasers Mode-Locked by Nonlinear Polarization Evolution in Stretched Pulse Regime

All-fiberized MOPA Structured Single-Mode Pulse Yb Fiber Laser with a Linearly Polarized Output Power of 30 W

Robust All Polarization-Maintaining Femtosecond Fiber Laser with Various Phase Bias

Linearly Polarized Polarization-Maintaining Er3+-doped Fluoride Fiber Laser in the Mid-Infrared