Abstract:Oxide dispersion strengthened (ODS) steels are promising materials for high temperature applications, in particular in fission and fusion nuclear reactors. In comparison to common reduced activation ferritic/martensitic steels they exhibit better resistance to neutron irradiation and creep owing to an uniform dispersion of nano-oxides particles (~5 nm) and a very fine grain structure (~500 nm). ODS steels are commonly prepared by high-energy mechanical alloying (HEMA) of a mixture of steel powder and Y2O3 particles followed by a consolidation stage consisting of hot extrusion (HE) or hot isostatic pressing (HIP). The samples are then submitted to annealing around 1100°C for 1-2 hours. Recently, the present authors proposed a novel method based on low-energy mechanical alloying (LEMA). In general ODS microstructure is quite complex and several mechanisms contribute to the mechanical strengthening with different effects depending on the temperature. The present work analyses the role played by each single mechanism at increasing temperature by considering the specific microstructural features. ODS steels prepared through different routes and process parameters display different grain size distribution and homogeneity of particles dispersion, factors which strongly affect the mechanical properties. Yield stress values measured in tensile tests performed at increasing temperature up to 700°C, either taken from literature or achieved by authors, have been examined and the following strengthening mechanisms have been considered to fit the experimental data: (i) solid solution; (ii) Bailey-Hirsch; (iii) Hall-Petch; (iv) Orowan; (v) Coble creep and (vi) Arzt-Rősler-Wilkinson. The analyses evidence advantages and drawbacks of different preparation routes and suggest some criteria for further improving the mechanical properties of these materials.

Small-angle Neutron Scattering Study on the Stability of Oxide Nanoparticles in Long-Term Thermally Aged 9Cr-Oxide Dispersion Strengthened Steel

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

DSI-based Studies of the Effects of High-temperature Aging on Local Mechanical Properties of HR3C/T92 Dissimilar Steel Welded Joint

Mechanical Properties and Microstructure of 9Cr-Ods-clf-1 Steel

Microstructural stability of a 9Cr oxide dispersion strengthened alloy under thermal aging at high temperatures

Study of Precipitates in Oxide Dispersion-Strengthened Steels by SANS, TEM, and APT

Twofold age-hardening mechanism of Al-added high-Cr ODS ferritic steels

Transformation of oxide nanoparticles in a nickel-based ODS alloy aged at 1000 °C

Nano-precipitate and its aging behavior in a B2-NiAl strengthened ferritic ODS alloy

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873 K

High-Temperature Oxidation Properties and Microstructural Evolution of Nanostructure Fe-Cr-Al ODS Alloys

Molecular Dynamics Simulation Study on the Possible Factors Affecting Stability of ODS Steel

Microstructural Stability of Long-Term Aged Wrought Ni–Fe-based Superalloys

Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications

Microstructure Evolution and Mechanical Properties of a High Cr Oxide Dispersion-Strengthened Steel through STARS Route Followed by Hot Isostatic Pressing

Probing the Fatigue Enhancement in a Thermally Aged Cast Duplex Stainless Steel by in Situ Neutron Diffraction

Microstructure, Grain Growth and Hardness of Nanostructured Ferritic ODS Steel Powder during Annealing

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Thermal stability and influence of Y2O3 dispersoids on the heat treatment response of an additively manufactured ODS Ni–Cr–Al–Ti γ/γ′ superalloy

Mechanical and Raman spectroscopic studies of multi-ion-beam irradiated 12,18Cr-oxide dispersion strengthened steels

Microstructure and mechanical properties evolutions of 9Cr heat resistant steel deposited metals with different Si contents during 550 °C aging process