Abstract:The lack of electrolyte that is stable under high potentials hinders the application of high-voltage cathode materials for lithium batteries; the introduction of electrolyte additives is clearly the most effective solution to address this issue. Herein, we investigated the synergistic effects of trimethyl borate (TMB) in two dual-additive electrolytes on protecting the LiNi0.8Co0.1Mn0.1O2 and LiCoO2 cathode materials under high potentials. The interactions of TMB with fluoroethylene carbonate and the catalysis of the decomposition product of TMB to tetramethylene sulfone lower the onset oxidation potential of these additives and are beneficial in forming a stable cathode electrolyte interphase film on the cathode materials. This work sheds light on another way of electrolyte designing for high-voltage cathode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04389?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04389</a>.Calculated HOMO energy of the electrolyte solvents and additives; FTIR profiles of pure FEC, pure TMB, TMB + FEC, FEC electrolyte, TMB electrolyte, and TMB + FEC electrolyte; first three CV cycles of the NCM811/Li cells; charging/discharging curves of the NCM811/Li cells; impedance changes of the NCM811/Li cells; XPS profiles of the NCM811 electrodes; possible mechanisms of TMB decomposition promoting the oxidation of TMS; XPS profiles of the NCM811 electrodes charged to 3.95 V; FTIR profiles of the NCM811 electrodes; cycling performance and Coulombic efficiency of the NCM811/Li cells at 60 °C, cycling performance and Coulombic efficiency of the NCM811/graphite full cells; cycling performance, Coulombic efficiency, EIS profiles, and rate performance of the LiCoO2/Li cells; SEM and TEM images of the LiCoO2 electrode; XPS profiles of the LiCoO2 electrode; Raman profiles of the LiCoO2 electrode (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04389/suppl_file/am1c04389_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improving High‐Voltage Performance of a LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode with Triallyl Phosphite As an Electrolyte Additive

Improved High-Voltage Performance of LiNi1/3Co1/3Mn1/3O2 Cathode with Tris(2,2,2-trifluoroethyl) Phosphite As Electrolyte Additive

Improved High-Voltage Performance of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Cathode with Tris(2,2,2-trifluoroethyl) Phosphite As Electrolyte Additive

Triphenylphosphine Oxide as Highly Effective Electrolyte Additive for Graphite/NMC811 Lithium Ion Cells

Enhancing the Electrochemical Performance of High Voltage LiNi0.5Mn1.5O4 Cathode Materials by Surface Modification with Li1.3Al0.3Ti1.7(PO4)3/C

Tris(trimethylsilane) Phosphite Additive for Improving the High Voltage Cycling Performance of a Nickel-Rich Layered Oxide Cathode Material

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Triphenyl Phosphite As an Electrolyte Additive to Improve the Cyclic Stability of Lithium-Rich Layered Oxide Cathode for Lithium-Ion Batteries

Gospel for Improving the Lithium Storage Performance of High-Voltage High-Nickel Low-Cobalt Layered Oxide Cathode Materials.

Trimethyl Phosphite As an Electrolyte Additive for High-Voltage Lithium-Ion Batteries Using Lithium-Rich Layered Oxide Cathode

Interface Modifications By Tris( 2,2,2-Trifluoroethyl) Borate For Improving The High-Voltage Performance Of Lini1/3co1/3mn1/3o2 Cathode

Unravelling the Enhanced High‐Temperature Performance of Lithium‐Rich Oxide Cathode with Methyl Diphenylphosphinite As Electrolyte Additive

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

Synergy Effect of Trimethyl Borate on Protecting High-Voltage Cathode Materials in Dual-Additive Electrolytes

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Functionality Selection Principle for High Voltage Lithium-ion Battery Electrolyte Additives

Outstanding electrochemical performance of high-voltage LiNi1/3Co1/3Mn1/3O2 cathode achieved by application of LiPO2F2 electrolyte additive

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Improving the Electrochemical Performances of Li-rich Li1.20Ni0.13Co0.13Mn0.54O2 Through a Cooperative Doping of Na+ and PO43− with Na3PO4