Abstract:Compared with other commercial cathode materials, the LiNi0.8Co0.1Mn0.1O2 cathode (NCM811) has high specific capacity and a relatively low cost. Nevertheless, the higher nickel content in NCM811 leads to an extremely unstable interface between the electrode and the electrolyte, resulting in inferior cyclic stability of the corresponding cell. Use of film-forming additives is regarded as the most feasible and economic approach to construct a stable interface on the NCM811 cathode. However, less effective electrolyte additives have been reported to date. Herein, we propose a valid film-forming electrolyte additive, 2,4,6-triphenyl boroxine (TPBX), for application in a high-voltage NCM811 cathode. Experimental and computational results reveal that the TPBX additive can be preferentially oxidized to generate a highly stable and conductive cathode electrolyte interface (CEI) layer on the NCM811 cathode, which efficiently suppresses the detrimental side reaction and improves the electrochemical performance eventually. In detail, the cyclic stability of the Li/NCM811 half-cell is enhanced from 57% (without additive) to 78% (with 5% TPBX) after 200 cycles at 1C between 3.0 and 4.35 V. At a high current rate of 15C, the TPBX-containing electrode delivers a capacity of about 135 mAh g-1, which is much higher than that of the electrode without the additive (80 mAh g-1). Interestingly, the TPBX is also reduced earlier than the ethylene carbonate (EC) solvent to form an ionically conductive solid electrolyte interface (SEI) film on the graphite anode. Due to the CEI layer on the cathode and the SEI film on the anode simultaneously formed by the TPBX additive, the cyclic performance of the graphite/LiNi0.8Co0.1Mn0.1O2 full cell is enhanced. Therefore, the incorporation of the TPBX additive into the electrolyte provides a convenient method for the commercial application of the high-energy-density NCM811 cathode in high-voltage lithium-ion batteries.

Triallyl Isocyanurate as an Efficient Electrolyte Additive for Layered Oxide Cathode Material-Based Lithium-Ion Batteries with Improved Stability under High-Voltage

A Multifunctional Thiophene-Based Electrolyte Additive for Lithium Metal Batteries Using High-Voltage LiCoO2 Cathode

Triallyl Borate as an Effective Separator/Cathode Interphase Modifier for Lithium-ion Batteries

Constructing a Low-Impedance Interface on a High-Voltage LiNi0.8Co0.1Mn0.1O2 Cathode with 2,4,6-Triphenyl Boroxine as a Film-Forming Electrolyte Additive for Li-Ion Batteries

Stabilizing the interphasial layer of Ni-rich cathode and graphite anode for lithium ion battery with multifunctional additive

Tris(trimethylsilane) Phosphite Additive for Improving the High Voltage Cycling Performance of a Nickel-Rich Layered Oxide Cathode Material

A New Anion Receptor for Improving the Interface Between Lithium- and Manganese-Rich Layered Oxide Cathode and the Electrolyte

Improving the Stability of High-Voltage Lithium Cobalt Oxide with a Multifunctional Electrolyte Additive: Interfacial Analyses

Multifunctional Electrolyte Additive Stabilizes Electrode–Electrolyte Interface Layers for High-Voltage Lithium Metal Batteries

In situ constructing a stable interface film on high-voltage LiCoO2 cathode via a novel electrolyte additive

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive

Stabilizing High-Voltage LiCoO2 Cathode in Aqueous Electrolyte with Interphase-forming Additive

A novel cathode interphase formation methodology by preferential adsorption of a borate-based electrolyte additive

Cost-Efficient Film-Forming Additive for High-Voltage Lithium–Nickel–Manganese Oxide Cathodes

Improved High-Voltage Performance of LiNi1/3Co1/3Mn1/3O2 Cathode with Tris(2,2,2-trifluoroethyl) Phosphite As Electrolyte Additive

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Stabilizing Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode by generating ion-conductive polymer coating layer with 1, 3-dioxolane introducing electrolyte for lithium-ion batteries

Improved Cyclic Stability of LiNi0.8Mn0.1Co0.1O2 Cathode Enabled by a Novel CEI Forming Additive

Improvement of electrochemical properties of lithium-rich manganese-based cathode materials by Ta2O5

Trioxane-Derived Stable Solid Electrolyte Interphase Enlightens High-Mass-Loading LiNi0.5Co0.2Mn0.3O2/Li Metal Battery

Significance of Electrolyte Additive Molecule Structure in Constructing Robust Interphases on High-Voltage Cathodes