Abstract:ABSTRACT The suspension is a very important subsystem of a vehicle as it affects both passenger ride comfort and the handling properties of the vehicle. This paper concentrates on two important aspects of suspension system design. One is the fine tuning of a passive suspension system design through an optimisation study using a virtual suspension system model. The second is the design and testing of an active suspension controller. Both problems are treated here in a computer aided setting using a highly realistic suspension system and a full vehicle model, respectively. INTRODUCTION The main reason for the existence of a suspension system like that shown in Figure 1 can be thought of as isolating the driver and passengers of a vehicle from the vibrations induced by road irregularities. This, however, is not the only reason for the use of a suspension system. According to Bastow and Howard (1993), maintaining contact between the wheels and the road surface is a far more fundamental issue as the vehicle's control and stability depends on it. So, suspension design requires concentration not only on ride comfort but also on handling characteristics. As ride and handling requirements are in conflict with each other, the design of suspension system characteristics like effective stiffness and damping require the determination of a compromise solution. While the well known quarter car model and higher order lumped parameter models used to represent the vehicle's overall suspension system are useful for preliminary work and initial design, suspension design work of any practical use has to take into account the physical details of the suspension system being used (double wishbone or McPherson strut type for example). While academic optimisation studies on suspension design and active suspension controller design can concentrate on the quarter car model (Cole, 2001; Yagiz and Yuksek, 2001), one needs to base these optimisation and controller design studies on a much more accurate model of the vehicle's suspension system to be able to transfer the results to the automotive industry. Fortunately, such accurate models are quite readily implementable in the form of canned multibody dynamics programs like Adams® (Anon., 2001) and Simpack (Kortum) or special purpose vehicle dynamics programs like Vedyna (Anon., 2000). The latter approach is taken in this paper. The suspension systems used are highly realistic models formed in Adams/Car® (Anon., 2001). This paper focuses on optimisation of suspension parameters and ride and handling properties and on implementation of active suspension control using an Adams/Car® suspension model. A first step in a suspension optimisation study is to determine which suspension variables can be varied and their

MODELLING AND SIMULATION OF AN ACTIVE VEHICLE SUSPENSION SYSTEM

The Application of Sensitivity Method in Vehicle Dynamics Analysis

Integrated Model Predictive Control and Adaptive Unscented Kalman Filter for Semi-Active Suspension System Based on Road Classification

Control and Simulation of Semi-Active Suspension Based on MRF Damper

USE OF COMPUTER AIDED METHODS FOR OPTIMISATION IN VEHICLE SUSPENSION DESIGN AND FOR DESIGNING ACTIVE SUSPENSIONS

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method

A New Model-Free Adaptive Sliding Controller for Active Suspension System.

Design and Simulation of a Feedback Controller for an Active Suspension System: A Simplified Approach

Road disturbances rejection of a semi-active vehicle suspension

Multi-objective frequency domain-constrained static output feedback control for delayed active suspension systems with wheelbase preview information

Study and Simulation of Vehicle Suspension System

Nonlinear modeling of vehicle suspension system

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

Modelling and Dynamic Analysis of Adaptive Neuro-Fuzzy Inference System-Based Intelligent Control Suspension System for Passenger Rail Vehicles Using Magnetorheological Damper for Improving Ride Index

Sliding Mode Control of Semi-active Suspension Based on Reference Model

Applied Mechatronics: Designing a Sliding Mode Controller for Active Suspension System

Bandwidth-limited active suspension controller for an off-road vehicle based on co-simulation technology

Effect of time-delay feedback control on vehicle seat vibration reduction and suspension performance

Design of robust active suspension system for performance improvement and vibration control of railway vehicles: An [math]-synthesis perspective

Study on Control Technology of Active Suspension Based on ADAMS and MATLAB

Using a PID controller to design an active suspension system in a car