Abstract:ABSTRACT The suspension is a very important subsystem of a vehicle as it affects both passenger ride comfort and the handling properties of the vehicle. This paper concentrates on two important aspects of suspension system design. One is the fine tuning of a passive suspension system design through an optimisation study using a virtual suspension system model. The second is the design and testing of an active suspension controller. Both problems are treated here in a computer aided setting using a highly realistic suspension system and a full vehicle model, respectively. INTRODUCTION The main reason for the existence of a suspension system like that shown in Figure 1 can be thought of as isolating the driver and passengers of a vehicle from the vibrations induced by road irregularities. This, however, is not the only reason for the use of a suspension system. According to Bastow and Howard (1993), maintaining contact between the wheels and the road surface is a far more fundamental issue as the vehicle's control and stability depends on it. So, suspension design requires concentration not only on ride comfort but also on handling characteristics. As ride and handling requirements are in conflict with each other, the design of suspension system characteristics like effective stiffness and damping require the determination of a compromise solution. While the well known quarter car model and higher order lumped parameter models used to represent the vehicle's overall suspension system are useful for preliminary work and initial design, suspension design work of any practical use has to take into account the physical details of the suspension system being used (double wishbone or McPherson strut type for example). While academic optimisation studies on suspension design and active suspension controller design can concentrate on the quarter car model (Cole, 2001; Yagiz and Yuksek, 2001), one needs to base these optimisation and controller design studies on a much more accurate model of the vehicle's suspension system to be able to transfer the results to the automotive industry. Fortunately, such accurate models are quite readily implementable in the form of canned multibody dynamics programs like Adams® (Anon., 2001) and Simpack (Kortum) or special purpose vehicle dynamics programs like Vedyna (Anon., 2000). The latter approach is taken in this paper. The suspension systems used are highly realistic models formed in Adams/Car® (Anon., 2001). This paper focuses on optimisation of suspension parameters and ride and handling properties and on implementation of active suspension control using an Adams/Car® suspension model. A first step in a suspension optimisation study is to determine which suspension variables can be varied and their

Optimal Control of an Active Suspension System Applying Distributed Parameter Simulation Test

Optimal Control of a Semi-Active Suspension System Collaborated by an Active Aerodynamic Surface Based on a Quarter-Car Model

Active Control of Vehicle Suspension Systems Based on Modal Decomposition Method

Ant Colony Optimization Tuned Closed-Loop Optimal Control Intended For Vehicle Active Suspension System

Design and Simulation of a Feedback Controller for an Active Suspension System: A Simplified Approach

Robust Optimal Control for the Vehicle Suspension System With Uncertainties

Optimal Sliding Mode Control for an Active Suspension System Based on a Genetic Algorithm

Global optimization control for nonlinear full‐car active suspension system with multi‐performances

Road disturbances rejection of a semi-active vehicle suspension

Performance evaluation and analysis for hydraulic active suspension using the collaborative control method

Active Suspension Control of Quarter-Car System With Experimental Validation

USE OF COMPUTER AIDED METHODS FOR OPTIMISATION IN VEHICLE SUSPENSION DESIGN AND FOR DESIGNING ACTIVE SUSPENSIONS

Optimal Control of Semi-Active Suspension for Agricultural Tractors Using Linear Quadratic Gaussian Control

LQR force command planning–based sliding mode control for active suspension system

Performance Improvement of Active Suspension System Collaborating with an Active Airfoil Based on a Quarter-Car Model

Active suspension LQR control based on modified differential evolutionary algorithm optimization

Linear Quadratic Optimal Control with the Finite State for Suspension System

Semi-active Suspension Control using Modern Methodology: Comprehensive Comparison Study

Passenger-Oriented Intelligent Suspension with a Biodynamic Model and Skyhook Control

Study on the coordination control of active suspension employing linear motor based on co-simulation

Bandwidth-limited active suspension controller for an off-road vehicle based on co-simulation technology