Abstract:This article presents a second-order successive approximation register (SAR)-assisted noise-shaping (NS) pipeline analog-to-digital converter (ADC) with optimized noise transfer function (NTF) zeros, background inter-stage gain, and offset calibrations. The NS, realized with an error-feedback (EF) structure, takes place in the second stage of the pipeline. A single amplifier, utilized for residue handover, realizes the EF and the optimized zeros. Copies of the EF capacitors allow their rotation role for residue saving, feedback, and sampling operations, thus omitting the extra phase for the EF operation. While further incorporating a coarse SAR ADC and partial interleaving techniques, the prototype can run at high speed with low power and strong in- band noise suppression. A split-over-time architecture with level-shift-based gain calibration is introduced to ensure the robustness of the ADC, whose hardware also facilitates the offset calibration. Besides, the split second-stage ADCs also share a single comparator, thus enabling a mismatch error insensitive split-ADC architecture with a fast convergence speed of 4000 cycles. Fabricated in 28 nm CMOS, the ADC prototype runs at a 260 MHz sampling rate and retains 20 MHz bandwidth (BW) with a signal-to-noise-and-distortion ratio (SNDR) of 79.1 dB under a small over-sampling ratio (OSR) of 6.5. It consumes 3.1 mW power at a 1 V supply and yields a Schreier figure-of-merit (FoMS) of 177.2 dB.

A 2.5-Gs/s Four-Way-Interleaved Ringamp-Based Pipelined-SAR ADC with Digital Background Calibration in 28-Nm CMOS

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A 2.5-Gs/s Time-Interleaved SAR-Assisted Ringamp-Based Pipelined ADC with Digital Background Calibration

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 200ms/s, 11 Bit SAR-assisted Pipeline ADC with Bias-Enhanced Ring Amplifier.

A 71.5-Db SNDR 475-Ms/s Ringamp-Based Pipelined SAR ADC with On-Chip Bit-Weight Calibration

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

A 91.0-Db SFDR Single-Coarse Dual-Fine Pipelined-SAR ADC with Split-Based Background Calibration in 28-Nm CMOS.

Artificial Neural Network Based Calibration for a 12 B 250 MS/s Pipelined-SAR ADC with Ring Amplifier in 40-Nm CMOS

A 800 MS/s, 12-Bit, Ringamp-Based SAR Assisted Pipeline ADC with Gain Error Cancellation

A Low-Power 12-Bit 2gs/S Time-Interleaved Pipelined-Sar Adc In 28nm Cmos Process

A 12-Bit 110ms/s 4-Stage Single-Opamp Pipelined SAR ADC with Ratio-Based GEC Technique

A 20 MHz Bandwidth 79 Db SNDR SAR-Assisted Noise-Shaping Pipeline ADC with Gain and Offset Calibrations

A Time-Interleaved SAR Assisted Pipeline ADC with a Bias-Enhanced Ring Amplifier.

A 10mw 10-ENOB 1gs/s Ring-Amp-Based Pipelined TI-SAR ADC with Split MDAC and Switched Reference Decoupling Capacitor.