Abstract:This article presents a 12-bit 1.5-GS/s single-channel pipelined successive approximation register (SAR) analog-to-digital converter (ADC). The ADC leverages a pipelined residue amplification (RA) stage scheme, early quantization technique, and fast differential ring amplifier (ringamp) to achieve high speed and high power efficiency simultaneously. The pipelined RA stage scheme allows the RA and SAR conversion to run in parallel for a fast pipelining operation and a relaxed residue amplifier's bandwidth requirement, thus alleviating the speed bottleneck of the pipelined SAR ADCs. The early quantization technique reduces the timing budget of the SAR conversion phase, thereby further improving the ADC speed. The differential ringamp with a short settling time and low common-mode gain guarantees the high accuracy and high speed of the critical RA. Furthermore, a flexible digital-to-analog-converter (DAC) topology combining the scaling capacitor and bridge capacitor is employed to align the quantization range avoiding large overheads. The prototype ADC was fabricated in a 28-nm CMOS process and consumes 21.3 mW at 1.5 GS/s. The signal-to-noise-and-distortion-ratio (SNDR) and spurious-free dynamic range (SFDR) are 58.5 and 74.5 dB with a Nyquist input, respectively, achieving a Walden figure-of-merit (FoM) of 20.7 fJ/conversion step and a Schreier FoM of 164 dB.

A 12-Bit 110ms/s 4-Stage Single-Opamp Pipelined SAR ADC with Ratio-Based GEC Technique

An 18-Bit 2MSPS SAR ADC with Double Passive Noise-Shaping Calibration

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 14-bit 500MS/s and 1GS/s Configurable Pipelined ADC with Background Calibration

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A Maximum-Likelihood-Estimation-Based Digital Background Calibration Technique for Interstage Gain Error in Pipelined ADCs

A 14bit 500MS/s 85.62dBc SFDR 66.29dB SNDR SHA-less pipelined ADC with a stable and high-linearity input buffer and aperture-error calibration in 40nm CMOS

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

A 13-Bit 312.5-Ms/s Pipelined SAR ADC with Integrator-type Residue Amplifier and Inter-stage Gain Stabilization Technique

A 71.5-Db SNDR 475-Ms/s Ringamp-Based Pipelined SAR ADC with On-Chip Bit-Weight Calibration

A 2.5-Gs/s Four-Way-Interleaved Ringamp-Based Pipelined-SAR ADC with Digital Background Calibration in 28-Nm CMOS

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

A calibration-free 10.7 fJ/conv.-step 12-bit 120-MS/s pipelined SAR ADC in 40nm CMOS

A 13-Bit 312.5-Ms/s Pipelined SAR ADC with Open-Loop Integrator-Based Residue Amplifier and Gain-Stabilized Integration Time Generation

A 2.5-Gs/s Time-Interleaved SAR-Assisted Ringamp-Based Pipelined ADC with Digital Background Calibration

A 200ms/s, 11 Bit SAR-assisted Pipeline ADC with Bias-Enhanced Ring Amplifier.

A 800 MS/s, 12-Bit, Ringamp-Based SAR Assisted Pipeline ADC with Gain Error Cancellation

Design of a 13 bit 50 MS/s CMOS Pipelined ADC

A 12-bit 1.1GS/s Pipelined-SAR ADC With Adaptive Inter-Stage Redundancy in 28 nm CMOS

A 625ms/s, 12-Bit, SAR Assisted Pipeline ADC with Effective Gain Analysis for Inter-stage Ringamps