Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Sun Yi-zhou,Pan Kun,Tang Chong,Sun Hong-lei,Cai Yuan-qiang,Pan Feng

DOI: https://doi.org/10.1007/s11440-022-01503-x

2022-01-01

Acta Geotechnica

Abstract:Rock masses in mountainous areas are often covered in moderately thick layers of soil or sand. An anchored pier foundation comprising a pier and rock anchors can make full use of the natural resistance of this geology in an economical and environmentally friendly manner. The cyclic uplift load of the anchored pier caused by wind or structural action needs to be paid attention to in design and bearing mechanism analysis. This paper presents a comprehensive study of the uplift behavior and load-sharing characteristics of the anchored pier foundation during the cyclic pullout loading. The results of three in-situ pullout tests indicate that the uplift capacity under cyclic uplift loading decreases with an increasing number of loading cycles. In addition, there is a load-sharing ratio between the pier and the anchor group of the anchored pier at each stage of the cyclic loading. Clearing this ratio is the key to calculating the uplift capacity of the anchored pier. To provide a theoretical solution, a hyperbolic model with two parameters was introduced to fit the measured load-displacement (P-s) curves. The fitting results show that the load-sharing ratio of the anchored pier under normal service conditions can be determined by the calculated value of the initial uplift stiffness ratio. By introducing the bearing mobilization coefficients (BMCs), the uplift bearing capacity of the anchored pier can be expressed as the combination of the ultimate uplift capacity of the upper and lower parts of the foundation. Finally, a design approach for anchored pier foundations is proposed, including the calculation of the cyclic and static uplift capacity.