Abstract:Large-diameter monopiles are the predominant foundation solution for supporting offshore wind turbines. They are conventionally designed using soil reaction curves developed for long slender piles used for supporting offshore oil and gas platforms (e.g., the API p-y model). However, due to the difference in the length/diameter ratio and the resulting soil mechanisms, the use of p-y curves alone can lead to significant under-prediction of the lateral stiffness and capacity of monopiles. To overcome the shortcoming, the authors have previously proposed a conceptual two-spring framework, i.e., the so-called 'p-y + M-R-theta(R)' model, to capture the monopile response in soft clay under lateral loading. The framework uses distributed p-y springs to consider the lateral soil resistance along the pile above the rotation point (RP) and a single moment-rotation (M-R-theta(R)) spring attached at the RP to capture the entire soil resistance below the RP, i.e., the distributed resistance along the pile, base shear and base moment at the pile tip. The proposed p-y and M-R-theta(R) springs were curve-fitted to the results of 3D numerical analyses. However, as the stress-strain response and the shear strength profile inevitably influence the p-y and M-R-theta(R) springs, the applicability of the empirical formulations to soil conditions other than those examined is uncertain. This study proposes an enhancement to the 'p-y + M-R-theta(R)' framework, in which the p-y and M-R-theta(R) springs are not tied to a specific soil and strength profile but fundamentally linked to the properties that can be measured directly in the site investigation and laboratory. This extension is achieved through analytical analyses and an extensive parametric numerical study. The predictive capabilities of the model are demonstrated by back-analyses of finite element analyses and centrifuge model tests. The proposed model provides practising engineers with a simple yet powerful approach to use site-specific soil reaction curves in the design of monopiles embedded in soft clay.

Enhanced Multi-Springs Model for Estimating Suction Caisson Responses under Cyclic Lateral Loading

Multi-springs Model for Suction Caisson under Monotonic Lateral Loading

Numerical Model for Suction Caisson under Axial Cyclic Loadings

Long-Term Lateral Cyclic Response of Suction Caisson Foundations in Sand

Nonlinear Spring Model for Dynamic Uplift Behaviour of Suction Caisson under Impact Loading

Cyclic moment loading of suction caissons in sand

Analysis and Design of Bearing Capacity of Suction Caisson Foundations of Offshore Wind Turbines

Dynamic Responses of Jacket Foundation Offshore Wind Turbine Considering the Cyclic Loading Effects

Cyclic accumulative deformation of sand and its explicit model

Experimental Study on Lateral Behaviour of Tetrapod Caisson Foundations in Silt

A Multi-Axial Bounding Surface P-Y Model with Application in Analyzing Pile Responses under Multi-Directional Lateral Cycling

Numerical Analysis of Dynamic Responses of Jacket Supported Offshore Wind Turbines

Dynamic Response of Offshore Open-Ended Pile under Lateral Cyclic Loadings

Dynamic Behavior of Piled Jacket Offshore Wind Turbines Based on Integrated Aero-Servo-hydro-ssi-owt Model

Simplified T -Z Models for Estimating the Frequency and Inclination of Jacket Supported Offshore Wind Turbines

A Novel T-Z Model to Predict the Pile Responses under Axial Cyclic Loadings

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Scaled Model Test Study of the Dynamic Behavior of an Offshore Wind Turbine Support Structure

Influence of bounding surface plasticity-based soil-structure interaction model on integrated dynamic behaviour of jacket offshore wind turbines

Site-specific soil reaction model for monopiles in soft clay based on laboratory element stress-strain curves

Inferred Winkler Model for Stiffness of Suction Caisson Foundation under Combined Loading in Non-Homogeneous and Layered Soil