Abstract:Abstract The bottom uplift pile, which has been applied in practical projects, has the following advantages: the pile body is not easy to crack, good bearing characteristics, and small displacement of the pile top. Based on the bearing capacity test of foundation piles in the third stage expansion project of Lanzhou Zhongchuan International Airport, the upper part pile of the self-balancing test method was used to simulate the bottom uplift pile, and the anchor piles in the anchor pile method were regarded as normal uplift piles. The bearing characteristics of the bottom uplift pile in a layered foundation were studied by comparing these two kinds of piles. The results show that under the same displacement of the pile top, the ultimate uplift bearing capacity of the bottom uplift pile can be more than twice that of the normal uplift pile because of the fully exerted frictional resistance of the soil at the bottom of the pile, the Poisson effect of the pile body and the avoidance of the influence of pile body deformation on the pile top displacement. The maximum axial force of the bottom uplift pile appears at the bottom of the pile and gradually decreases from the bottom to the top, which is opposite to that of the normal uplift pile. The properties and thickness of the soil layers around the pile have a great influence on the distribution curves of the frictional resistance along the pile length of the two kinds of uplift piles. With changing soil layer conditions, the distribution curve may be a "parabola", a "straight line" or a "double line". The soil property plays a decisive role in the frictional resistance, which may cause softening. The influence of the pile diameter on the ultimate uplift bearing capacity is greater than that of the pile length, while the elastic modulus of the pile has little influence.

Field test on uplift bearing characteristics of transmission tower foundation in mountainous areas of western China

Field Trials on Monotonic Behaviour of a Driven Pile at an Offshore Wind Farm in China

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Static Load Test and Load Transfer Mechanism Study of Squeezed Branch and Plate Pile in Collapsible Loess Foundation

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Field Tests of Offshore Driven Piles Subjected to Lateral Monotonic and Cyclic Loads in Soft Clay

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Investigation on Uplift Behavior of Rock-Socketed Belled Piles in Horizontal and Inclined Ground Using 1-g Model Test and 3D Numerical Method

Calculation Method of Uplift Capacity of Pile-Anchor Composite Foundation and Influence of Parameters

Monotonic Uplift Behavior of Anchored Pier Foundations in Soil Overlying Rock

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Numerical simulation of the uplift bearing behavior of pile foundations for transmission towers in expansive soil area

Experimental and Computational Research on the Uplift of Composite Foundation of Belled Pier and Rock Anchor in Transmission Line Engineering

Experimental Study Of Correlation Of Dynamic Compaction For Foundation Backfilled With Crushed Stone

Studies on Bearing Characteristic of Open-Ended and Close-Ended Pipe Piles under High-Speed Railway Loadings

Multi-scale study of load-bearing mechanism of uplift piles based on model tests and numerical simulations

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

A case study on the bearing characteristics of a bottom uplift pile in a layered foundation

Effects of deep excavation on uplift capacity of piles by centrifuge tests

Vertical bearing capacity of rock-socketed pile with enlargement at pile end

Ultimate Uplift Capacity of Transmission Tower Foundation in Undisturbed Excavated Soil