Abstract:This paper presents a novel design for uplift piles incorporating a composite-anchor system. The composite-anchor system consists of steel strands, a non-expansion grouting body, and a high-strength steel pile. The aim of this design is to enhance the mechanical performance, durability, and economic efficiency of uplift piles. To evaluate the performance of the new pile, three sets of full-scale load tests were conducted, focusing on their in situ capacity, deformation, and stress characteristics. Despite a significantly lower reinforcement ratio of 0.75% compared to conventional piles with a ratio of 3.84%, the new uplift piles exhibit an exceptional uplift bearing performance. The utilization of the lateral friction resistance of the lower pile body is significantly improved, leading to enhanced load distribution and stress transfer mechanisms. Furthermore, a numerical model was developed and validated against the experimental results, demonstrating its reliability in simulating the bearing characteristics of the new uplift piles. The multi-interface design of the composite-anchor system ensures the efficient transmission of internal forces induced by external uplift loads, resulting in an improved stress state within the pile body. Moreover, the multi-layer structure of the composite main bar enhances the durability of the uplift piles. In comparison to conventional piles, the new uplift pile design offers substantial advantages, including an 80% reduction in reinforcement ratio, a 65% reduction in reinforcement cage welding, a cost reduction of approximately 30%, and a shortened construction time by around 20%. These findings highlight the potential of the new composite-anchor-pile design to revolutionize the field of uplift pile applications, offering improved efficiency and effectiveness.

Study on the Displacement Characteristic of Uplift Anchor under Cyclic Loading

Field Experimental Study on Cyclic Uplift Behavior of Anchored Pier Foundations

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

Monotonic Uplift Behavior of Anchored Pier Foundations in Soil Overlying Rock

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Analysis and prediction of anchored caisson foundation displacement based on monitoring data

Uplift Behaviors of Bored Piles Subjected to High Critical Cyclic Loading Level

Axial Interaction Between Anchor Chain and Sand. Part II: Cyclic Loading Test

Bearing Performance of a Novel Caisson-Plate Gravity Anchor

Experimental and Numerical Investigation of Uplift Behavior of Umbrella-Shaped Ground Anchor

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Numerical study on uplift capacity and behavior of plate anchor considering different dilation angles

Uplift Behavior of Pipes and Strip Plate Anchors in Sand

Nonlinear Spring Model for Dynamic Uplift Behaviour of Suction Caisson under Impact Loading

Systematic Monitoring of the Performance of Anchor Systems in Fractured Rock Masses

A Simplified Model for Predicting the Accumulated Displacement of Monopile under Horizontal Cyclic Loadings

Development and Mechanical Property Analysis of a Novel Uplift Pile Incorporating Composite Anchors

Experimental and Computational Research on the Uplift of Composite Foundation of Belled Pier and Rock Anchor in Transmission Line Engineering

Centrifuge Modeling of the Performance of Suction Anchor in Soft Clay

Installation Disturbance of Helical Anchor in Dense Sand and the Effect on Uplift Capacity Based on Discrete Element Method

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features