Abstract:Abstract High-precision micro/nano probe plays an increasingly important role in manufacturing and measurement. The multi-arm elastic mechanism that can produce deformation under the contact force is widely used in the design of probe. The striking feature of this mechanism is that multiple variables are coupled to each other and are not easily separated. However, the transfer matrix of probe, rather than a multivariable decoupling model, is widely used as a measurement model in traditional research. Transfer matrix appears as a “black box” and does not reveal working principles of probe. Our previous research proposed a 3D decoupling model. The 3D model presents the coupling relationship between input and output variables, and also finishes a theoretical explanation of complex features of 3D probe. Recent studies have found that this decoupling model has practical value in parameter and shape optimization of probe. As the optimized purpose, two indicators — sensitivity and compliance (reciprocal of stiffness) are proposed from the model. The increased sensitivity means the probe has a lower resolution requirement for the capacitive sensor used. High compliance of probe means small contact force between the stylus ball and workpiece. Excessive stiffness can cause excessive contact forces that damages surface of workpiece. Combined with theoretical model and finite element analysis (FEA), the key parameters affecting sensitivity and compliance of probe are extracted, and a new optimized elastic mechanism based on an original Hexflex mechanism. The new optimized probe has better performance with sensitivity, input compliance, output compliance increased by 78.6%, 48.4%, 157.7%, respectively.

A Three-Dimensional Isotropic Microprobe for the Measurement of Microstructures

Design of Three-dimensional Isotropic Microprobe Based on Three-Flexible-Hinge Suspension for Measurement of Microstructures

Three-Dimensional Nano Measurement System Based on Resonant Trigger Probe

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

A 3D fiber probe based on orthogonal micro focal-length collimation and fiber Bragg grating

Assembled Cantilever Fiber Touch Trigger Probe for Three-Dimensional Measurement of Microstructures.

Development of a High-Precision Multifunctional Probe for Measuring Microstructures

A dual-probe three-dimensional profile measurement system

Improvement Of Dimensional Measurement Accuracy Of Microstructures With High Aspect Ratio With A Spherical Coupling Fiber Probe

Spherical Coupling Probe for Measuring Inner Dimensions of Microstructures.

Investigation Of A Three-Dimensional Micro-Scale Sensing System Based On A Tapered Self-Assembly Four-Cores Fiber Bragg Grating Probe

Optical Fiber Probe Based On Spherical Coupling Of Light Energy For Inner-Dimension Measurement Of Microstructures With High Aspect Ratios

A Tapered Fourcores Phase-Shift FBG Probe for Three-Dimensional Micro-Scale Measurement

An Optimized 3D Displacement Probe Using Sensitivity-Compliance Joint Model

Three-dimensional atomic force microscopy based on tailored cantilever probe with flared tip

A novel scanning tunneling microscopy for long range and high aspect ratio measurement

An Optimized 3D Probe Using Sensitivity and Compliance Analysis

Development of Elastic Diaphragm Structure for Ultra-low Stiffness Probe and Mechanical Properties Testing Method

Microstructured Cantilever Probe on Optical Fiber Tip for Microforce Sensor

Analysis and Design of Fiber Microprobe Displacement Sensors Including Collimated Type and Convergent Type for Ultra-Precision Displacement Measurement

Three-dimensional Fiber Probe Based on Micro Focal-Length Collimation and a Fiber Bragg Grating for the Measurement of Micro Parts.