Abstract:Shrinkage cracks are some of the most common defects in timber structures obtained from woods with an uneven distribution of moisture content and are subject to external dynamic environmental changes. To accurately predict the changes in the moisture content of wood components at any time and position, this study first applied the principles of food drying and established a moisture field model for laminated wood based on the analogy between heat and humidity transfer. A model for predicting the moisture content of wood that considers time and spatial distribution was then proposed. Second, by collecting relevant experimental data and establishing a finite element analysis model, three moisture absorption conditions (0–9.95%, 0–13.65%, and 0–17.91%) and four desorption conditions (34–5.5%, 28–8.3%, 31–11.8%, and 25.5–15.9%) were analyzed. In the moisture absorption comparison, the time needed to reach 95% equilibrium moisture content was 2.43 days, 4.07 days, and 6.32 days. The rate at which the internal components reached equilibrium moisture content exceeded 10 days. The temporal and spatial distribution of wood moisture content revealed the correctness of the proposed wood moisture field model. Finally, the moisture content prediction model was applied in the order of characteristic equation solutions, moisture content gradient difference, and laminated wood size. The results revealed that the established humidity field model can predict the wood moisture content and how it changes over time and in space. Notably, 1–2 orders for the solution of the characteristic equation are recommended when applying the prediction model. The greater the difference in moisture content, the faster the equilibrium moisture content is reached. The moisture content varies greatly based on the component size and position. Notably, the influence of moisture gradient and wood size on the average wood moisture content cannot be ignored.

Damage Risk Assessment of Building Materials with Moisture Hysteresis

Effects of Considering Moisture Hysteresis on Wood Decay Risk Simulations of Building Envelopes

Heat and Moisture Transfer in Wall-to-floor Thermal Bridges and Its Influence on Thermal Performance

The Moisture Distribution in Wall-to-floor Thermal Bridges and Its Influence on Mould Growth

Facilitator of moisture accumulation in building envelopes and its influences on condensation and mould growth

MOISTURE SORPTION ISOTHERMS AND ISOSTERIC HEATS OF SORPTION OF HIGH-PRESSURE TREATED PAULOWNIA WOOD UNDER DIFFERENT STORAGE CONDITIONS

A Simplified Analytical Model for U-shaped Steel Dampers Considering Horizontal Bidirectional Deformation

Decay of wooden commodities – Moisture risk analysis, service life prediction and performance assessment in the field

A Waveform Clustering Method for Damage Mode Identification for Composite Laminates under Hygrothermal Environment

Prediction Distribution Model of Moisture Content in Laminated Wood Components

Computational characterisation of the heat flow meter method applied to moist bio-based insulating building materials

Comparative studies on the durability and moisture performance of wood modified with cyclic N-methylol and N-methyl compounds

Rheological Model for Wood

Moisture-induced Damage Evolution in Laminated Beech

Assessment Method of Numerical Prediction Models for Combined Heat, Air and Moisture Transfer in Building Components: Benchmarks for One-dimensional Cases

Numerical investigations of dynamic moisture response to the climates inside wooden components in timber buildings and its potential threats

Prediction of moisture-induced cracks in wooden cross sections using finite element simulations

Selection of moisture reference year for freeze thaw damage assessment of historic masonry walls under future climate: A simulation-based approach

Sensitivity analysis of hygrothermal performance of wood framed wall assembly under different climatic conditions: the impact of cladding properties

Dynamic mechanical analysis (DMA) of waterlogged archaeological wood at room temperature

Evaluation of Different Thermal Models in EnergyPlus for Calculating Moisture Effects on Building Energy Consumption in Different Climate Conditions