Abstract:A surface‐to‐bulk modification is proposed for Ni‐rich LiNi0.83Co0.06Mn0.11O2, creating an amorphous lithium phosphates outmost layer, a reconstructed NiO layer at the subsurface, and a gradient phosphorus doping in the bulk. The multifunctional structure effectively preserves its lattice integrity, prevents interfacial side reactions, and enhances cycle stability at high voltage and elevated temperature. Nickel‐rich cathode materials have gained popularity in the development of lithium‐ion batteries (LIBs) due to their high energy density, which exceeds 250 Wh kg−1. However, the instability of bulk and surface structures has significantly limited their industrial application. In this study, a three‐in‐one approach to synergistically modulate the structure of LiNi0.83Co0.06Mn0.11O2 (NCM83) from surface to bulk by a phytic acid (PA) coating is proposed. This surface treatment leads to the spontaneous formation of an amorphous lithium phosphates coating layer on the outermost surface, a reconstructed NiO layer at the subsurface, and a gradient P doping in the NCM83 bulk. The resulting hierarchical and multifunctional structure provides a facilitated surface Li‐ion conduction, a NiO‐stabilized subsurface with strong resistance toward side reactions between the electrode and electrolyte, a fast Li ion bulk diffusion endowed by the enlarged LiO6 slab due to the P doping, and an enhanced H2−H3 phase transition reversibility. As a result, the PA‐NCM83 sample exhibits excellent capacity retention with 72.4% after 300 cycles at 1 C within 2.8–4.45 V, and 69.8% after 200 cycles at an elevated temperature of 45 °C. This approach provides a facile and efficient method to stabilize Ni‐rich cathode materials for next‐generation high‐energy LIBs.

Multi-Functional Modification of Nickel-Rich Lithium Cathode Materials Using Na 2PO 3F

Multi-functional modification of nickel-rich lithium cathode materials using Na 2 PO 3 F

Multi-functional modification of nickel-rich lithium cathode materials using Na<sub>2</sub>PO<sub>3</sub>F

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Dual Modification for Low-Strain Ni-Rich Cathodes Toward Superior Cyclability in Pouch Full Cells

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Reinforcing electrochemical performance of Ni‐rich NCM cathode co‐modified by mg‐doping and Li3PO4‐coating

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Protective and ion conductive: Ni-Rich cathode with enhanced electrochemical performance via dual-modification

Surface Coating of NCM523 Cathode Electrodes by the Difunctional Block Copolymer/Lithium Salt Composites

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials