Abstract:Single crystalline Ni-rich layered oxide cathodes show high energy density and low cost, have been regarded as one of the most promising candidates for next generation lithium-ion batteries (LIBs). Extending the cycling voltage window will significantly improve the energy density, however, suffers from bulk structural and interfacial chemistry degradation, leading to rapidly cycle performance deterioration. Here, we propose a dual-modification strategy to synthesize La doping and Li 3 BO 3 (LBO) coating layers modified LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) by a facile one-step heating treatment processing. In-situ EIS and XRD, ex-situ XPS techniques are applied to demonstrate that the La diffused amorphous domains and Li 3 BO 3 passivating layers dampen the lattice distortion, enhance the interfacial chemistry behavior as well as lithium ion transportation kinetics. Specifically, surface La doping amorphous domains successfully suppress the intense lattice stress and volume changes induced by the phase transitions during lithiation/delithiation, thus avoiding the intergranular crack and enhancing the mechanical stability of the material. Moreover, the LBO layer formed by the consumption of residual lithium prevents successive parasitic reactions at the interface as well as provides rapid Li-ion diffusion channels. Furthermore, the coating layer also diminishes the residual lithium compounds, increasing the atmosphere stability and safety of LIBs. Consequently, the La doping and LBO coating NCM811 exhibits an exceptional initial specific capacity (230.6 mAh/g) at 0.5C under a high cutoff voltage of 4.8 V, and a 73.8 % capacity retention following 100 cycles. In addition, a superior specific capacity of 133.8 mAh/g is provided even at a high current density (4C). Our work paves a promising road to tackle the integral structure deterioration and interfacial instability of Ni-rich cathodes.

Multi-functional modification of nickel-rich lithium cathode materials using Na 2 PO 3 F

Multi-Functional Modification of Nickel-Rich Lithium Cathode Materials Using Na 2PO 3F

Multi-functional modification of nickel-rich lithium cathode materials using Na<sub>2</sub>PO<sub>3</sub>F

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

Surface to Bulk Synergetic Modulation of Nickel‐Rich LiNi0.83Co0.06Mn0.11O2 via a Three‐in‐One Approach for Long‐Cycle Lithium‐Ion Batteries

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Surface-targeted functionalization of nickel-rich cathodes through synergistic slurry additive approach with multi-level impact using minimal quantity

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Simultaneous Li2MoO4 coating and Mo6+ doping improves the structural stability and electrochemical properties of nickel-rich LiNi0.83Co0.11Mn0.06O2

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Boosting High‐Voltage and Ultralong‐Cycling Performance of Single‐Crystal LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Materials via Three‐in‐One Modification

Double Conductor Coating to Improve the Structural Stability and Electrochemical Performance of LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode Material

Dual Modification for Low-Strain Ni-Rich Cathodes Toward Superior Cyclability in Pouch Full Cells

Reinforcing electrochemical performance of Ni‐rich NCM cathode co‐modified by mg‐doping and Li3PO4‐coating

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

Sol/Antisolvent Coating for High Initial Coulombic Efficiency and Ultra-stable Mechanical Integrity of Ni-Rich Cathode Materials

Protective and ion conductive: Ni-Rich cathode with enhanced electrochemical performance via dual-modification

A novel perspective on surface modification of LiNi0.5Co0.2Mn0.3O2 cathode materialfor lithium‐ion batteries