Abstract:Aiming for increased nickel and lower cobalt content in layered transition metal oxide cathodes (NCM) is a feasible strategy for achieving increased energy density and cost competitiveness in commercial lithium‐ion batteries. However, the practical long‐term cycling of NCM cathodes suffers from severe capacity degradation due to irreversible interface phase transformation and unavoidable crack formation. Herein, an in situ modification strategy is used to form a uniform and conformal Li1.8Sc0.8Ti1.2(PO4)3 (LSTP) protective layer by interconnecting the single‐crystal‐layered LiNi0.6Co0.1Mn0.3O2 (SC‐NCM) particles. LSTP surface modification helps to construct a robust cathode‐electrolyte interphase thin film between the cathode and the electrolyte, which can prevent SC‐NCM corrosion by electrolyte, and the stability of the mechanics can improve the intergranular cracks caused by long cycles under harsh conditions. Moreover, the LSTP conductive modification layer facilitates the lithium‐ion transport among cathode particles, effectively enhancing the rate capability. Impressively, the LSTP modified SC‐NCM exhibits a high reversible capacity of 144.3 mAh g−1 at the high discharge rate of 5 C and maintains a capacity retention of 90.27% even at the ultrahigh charge voltage of 4.6 V operation after 500 cycles. Moreover, in a pouch‐type full battery, the graphite/LSTP modified SC‐NCM maintains a capacity retention of 89.6% after 1700 cycles. An innovative surface modification is developed to improve the long‐term cyclability and rate capability of a single‐crystalline Ni‐rich cathode. The surface modification strategy improves the mechanical stability and lithium‐ion transport, which creates a strong CEI interface to prevent electrolyte corrosion and improve the intergranular cracks caused by long cycles under harsh conditions.

Dual Modification for Low-Strain Ni-Rich Cathodes Toward Superior Cyclability in Pouch Full Cells

Dual Modification Strategy for Enhanced Cycling and Rate Performance of Ni-Rich Cathode Materials in Lithium-Ion Batteries

Dual-modified surface encapsulation strategy for elevating rate performance and cycling stability of Ni-rich NCM811 cathode

Thermodynamically Stable Dual‐Modified LiF&FeF3 layer Empowering Ni‐Rich Cathodes with Superior Cyclabilities

Enhancing the Electrochemical Performance of Ni-Rich Layered Oxide Cathodes by Combination of the Gradient Doping and Dual-Conductive Layers Coating

Modification of the Ni-Rich Layered Cathode Material by Hf Addition: Synergistic Microstructural Engineering and Surface Stabilization.

Suppressing capacity fading and voltage decay of Ni-rich cathode material by dual-ion doping for lithium-ion batteries

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

Enabling high-rate discharge capability and stable cycling for Ni-rich layered cathodes via multi-functional modification strategy

Dual-Modified Compact Layer and Superficial Ti Doping for Reinforced Structural Integrity and Thermal Stability of Ni-Rich Cathodes

Dual modification of LiNi0.95Co0.04Mn0.01O2 for enhancing its cycling stability in lithium-ion batteries

Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries

Strain engineering of Ni‐rich cathode enables exceptional cyclability in pouch‐type full cells

Tuning the Interface Stability of Nickel-Rich NCM Cathode Against Aggressive Structural Collapse via the Synergistic Effect of Additives

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating

Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability

An effective dual-modification strategy to enhance the performance of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode for Li-ion batteries

Enhancing chemomechanical stability and high-rate performance of nickel-rich cathodes for lithium-ion batteries through three-in-one modification

Olivine-based Nano-Filling Layer Empowering Ni-rich Layered Cathodes with Enhanced Surface Stability and Thermal Shock Resistance

Ta induced fine tuning of microstructure and interface enabling Ni-rich cathode with unexpected cyclability in pouch-type full cell