Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

Dynamics of 5-DOF Aerostatic Spindle with Time-Varying Coefficients of Air Bearing

Dynamic Modeling of Aerostatic Spindle with Shaft Tilt Deformation

Dynamic modeling and vibration response analysis of high speed motorized spindle

Dynamic Analysis of 5-Dofs Aerostatic Spindles Considering Tilting Motion with Varying Stiffness and Damping of Thrust Bearings

The Static Performance Of The High-Speed Aerostatic Spindles With Modified Discharge Coefficients

Dynamic Modelling and Vibration Simulation of Air Bearing Spindle Systems Due to Unbalance

Relationship between dynamic characteristics of air film of aerostatic spindle and mid-frequency of surface topography

Analysis and Experimental Verification of Dynamic Characteristics of Air Spindle Considering Varying Stiffness and Damping of Radial Bearings

Dynamic Modeling of Spindle Bearing System and Vibration Response Investigation

Multi-physics Coupling Analysis of an Aerostatic Spindle

Analytical Modeling Method of Dynamics for the Spindle Rotor System

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

Coupled Model of Rotary-Tilting Spindle Head for Pose-Dependent Prediction of Dynamics

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Influence of Imbalance Factors Coupling with Manufacturing Error on the Rotational Accuracy of Aerostatic Spindle

Multi-Physics Simulation Based Design And Analysis Of A High Speed Aerostatic Spindle And Its Performance Assessment

Design and Analysis of Aerostatic Spindle with High Load Characteristics for Large Ultra-Precision Drum Lathe

Multiphysics-based Design and Analysis of the High-Speed Aerostatic Spindle with Application to Micro-Milling

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

A Novel Dynamic Modeling Method for Aerostatic Spindle Based on Pressure Distribution