Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

Dynamic Modeling and Parameters Identification of a Spindle–holder Taper Joint

Dynamic modeling and vibration response analysis of high speed motorized spindle

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Modeling of Spindle Dynamics and Tool Point Frequency Response Function Prediction

Modeling and simulation of wear for alignment mechanism of large aircraft component

Dynamic analysis of the column-spindle system considering the nonlinear characteristics of kinematic joints

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

An Integrated Joint Dynamics System for Elastically Jointed Structures

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Influence of Bearing Configuration on Spindle Modal Characteristics

Modeling and prediction of spindle dynamic precision using the Kriging-based response surface method with a novel sampling strategy

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces

A virtual material-based static modeling and parameter identification method for a BT40 spindle–holder taper joint

Dynamic Analysis and Optimization of Machine Tool in Consideration of Joint Parameters

Modelling and Characteristic Investigation of Spindle-Holder Assembly under Clamping and Centrifugal Forces

Dynamic Model and Dynamic Characteristics of a 3-DOF Spindle with a Parallel Linkage Mechanism

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part II: Dynamic Simulation and Validation

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System