Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Modeling of Spindle Dynamics and Tool Point Frequency Response Function Prediction

Dynamic modeling and vibration response analysis of high speed motorized spindle

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

An Efficient Experimental Approach to Identify Tool Point FRF by Improved Receptance Coupling Technique

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Milling Stability Prediction of a Hybrid Machine Tool Considering Low-Frequency Dynamic Characteristics

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

Modeling and prediction of spindle dynamic precision using the Kriging-based response surface method with a novel sampling strategy

Modelling and Characteristic Investigation of Spindle-Holder Assembly under Clamping and Centrifugal Forces

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

A Predictive Model for Temperature Rise of Spindle–Bearing Integrated System

Rapid prediction of posture-dependent FRF of the tool tip in robotic milling

Dynamic Modeling and Parameters Identification of a Spindle–holder Taper Joint

The prediction of 3D surface topography in a high-speed micro-milling process with aerostatic spindle

Stability analysis of machine tool spindle under uncertainty

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Characteristics of stiffness and contact stress distribution of a spindle-holder taper joint under clamping and centrifugal forces

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain