Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part II: Dynamic Simulation and Validation

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part I: Modeling of Geometric Faults

A Physics-based Model-data-driven Method for Spindle Health Diagnosis, Part III: Model Training and Fault Detection

Dynamic modeling and vibration response analysis of high speed motorized spindle

Dynamic Modeling Of Machine Tool Spindle Bearing System And Model Based Diagnosis Of Bearing Fault Caused By Collision

Modelling and Vibration Analysis of Machine Tool Spindle System with Bearing Defects

Method for Vibration Response Simulation and Sensor Placement Optimization of A Machine Tool Spindle System with A Bearing Defect

Dynamic Linearization Modeling Approach for Spindle Thermal Errors of Machine Tools

Diagnosis of High-Speed Ball-Bearing Spindles by Data Mining of Dynamic Responses from Various Rotating Elements

Dynamics Modeling and Modal Experimental Study of High Speed Motorized Spindle

Dynamics Analysis of Unbalanced Motorized Spindles Supported on Ball Bearings

Development of a Digital Model for Predicting the Variation in Bearing Preload and Dynamic Characteristics of a Milling Spindle under Thermal Effects

Dynamic Modelling and Vibration Simulation of Air Bearing Spindle Systems Due to Unbalance

An Integrated Prediction Model for the Dynamics of Machine Tool Spindles

Model-based Error Motion Prediction and Fit Clearance Optimization for Machine Tool Spindles

Dynamic Modeling of Aerostatic Spindle with Shaft Tilt Deformation

Dynamic Modeling of Spindle Bearing System and Vibration Response Investigation

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

Model-Based Dynamical Properties Analysis of A Motorized Spindle System with an Adjustable Preload Mechanism

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Fault diagnosis of high-speed motorized spindles based on lumped parameter model and enhanced transfer learning