Abstract:The productivity, surface finish, and dimensional accuracy during machining are directly related to the vibration characteristics of tool tip. Moreover, the dynamics of tool tip is not only determined by the flexibility of tool, collet, holder and spindle, but also depends on the contact characteristics of joint interfaces. This paper proposes a fully analytical model of the spindle-holder-tool system considering the nonlinear contact characteristics of joint interfaces. The dynamics of spindle, holder, collet and tool are modeled applying Timoshenko beam theory considering the combined shear and rotational effects, in which the tapered sections of spindle, holder and collet are modeled using multi-stepped beam to account for the taper effect. Under highly dynamic cutting load, the variation in the spacing of joint interfaces will induce the changes in the contact characteristics due to the corresponding vibrations. Therefore, the contact behaviors of spindle/holder, collet/holder, collet/nut, and tool/collet interfaces are analytically modeled using the distributed nonlinear spring-damping layers. The fractal theory and the slicing method are applied to derive the vibration displacement-dependent stiffness matrix of nonlinear springs in joint interfaces considering the surface morphology, geometry, material properties, and locking force of joint interfaces. Furthermore, the five degree of freedom (DOF) nonlinear stiffness model of the spindle-bearing joint dependent on vibration displacement is also considered. The effectiveness of the established analytical dynamic model is verified through vibration testing and modal hammering experiments. The changes in the vibration characteristics by considering the connection ways of joint interfaces, the fractal parameters of joint interfaces and the rotation speed are also investigated. The developed model can provide some theoretical principles for the optimization at design stage without prototypes.

Dynamic Model and Dynamic Characteristics of a 3-DOF Spindle with a Parallel Linkage Mechanism

Dynamic modeling and vibration response analysis of high speed motorized spindle

Dynamic analysis of the column-spindle system considering the nonlinear characteristics of kinematic joints

Dynamic Analysis of the 2-DOF Planar Parallel Manipulator of a Heavy Duty Hybrid Machine Tool

A fully analytical nonlinear dynamic model of spindle-holder-tool system considering contact characteristics of joint interfaces

Dynamic Modeling and Parameters Identification of a Spindle–holder Taper Joint

Research On The Dynamic Characteristics Of A 3-Dof Parallel Tool Head

Milling Stability Prediction of a Hybrid Machine Tool Considering Low-Frequency Dynamic Characteristics

A Study on the Dynamic Characteristics of the 2-DOF Redundant Parallel Manipulator of a Hybrid Machine Tool.

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Dynamics Prediction of Spindle System Using Joint Models of Spindle Tool Holder and Bearings

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Dynamic Analysis and Optimization of Machine Tool in Consideration of Joint Parameters

Dynamic Modeling Of A Bi-Driven High Speed Ball Screw System

Improved Stiffness Modeling for An Exechon-Like Parallel Kinematic Machine (PKM) and Its Application

Nonlinear dynamics investigation of a multi-axis drive system due to the kinematic joints

Dynamic Modeling Of Multi-Axis Synchronous Gantry Machining Center

Mechatronics modeling and vibration analysis of a 2-DOF parallel manipulator in a 5-DOF hybrid machine tool

Thermal-mechanical dynamic interaction in high-speed motorized spindle considering nonlinear vibration

Dynamic Analysis and Counterweight Optimization of the 2-Dof Parallel Manipulator of A Hybrid Machine Tool