Abstract:Hydrogen is the ideal green fuel and carbon-neutral energy carrier alternative to nonrenewable fuel sources. The high construction cost of hydrogen refueling stations has become one of the limitations to the further promotion and application of hydrogen energy. To realize 8-22 MPa hydrogen compression under mild conditions, the low cost Ti0.95Zr0.07Cr1.7-xMn0.3Fex (x = 0-0.5) alloys were designed and prepared by magnetic levitation melting in this work. The effect of Fe on Cr substitution on the microstructure and hydrogen storage properties of the alloy has been systematically investigated. With the increase of Fe substitution for Cr, all the alloys maintain a single C14 Laves phase, the thermodynamic plateau curve broadens and rises, while the hydrogen storage capacity diminishes slightly. For a better description of the thermodynamic properties of alloys at high temperatures as the function of temperature, a non-linear Van't Hoff fitting is introduced with satisfactory prediction. On account of significant Fe substitution for Cr, the unit cell shrinks and the interstitial size of alloy decreases, an optimal alloying constituent, Ti0.95Zr0.07Cr1.3Mn0.3Fe0.4, has been proposed and experimentally proved for the first time. This alloy exhibits the best overall performances and the plateau pressure is respectively 5.74 MPa for hydro-genation at 283 K and 25.97 MPa for dehydrogenation at 353 K without apparent hysteresis phenomenon. The hydrogen storage capacity is 1.59 wt% within 3 min and dehydrogenation enthalpy is 21.20 kJ/mol H2. This study provides a comprehensive insight into the low-cost hydrogen storage alloy design and application on quick response and high cycle stability metal hydride hydrogen compressors.

Effects of the Different Element Substitution on Hydrogen Storage Properties of Ti0.8Zr0.2Mn0.9Cr0.6V0.3M0.2 (M = Fe, Ni, Co)

Experimental and Theoretical Investigation on the Enhanced Hydrogen Storage Performance of Ti–Cr–Mn–Fe-Based Alloys Modified by Nb Substitution

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Effect of Rare Earth Doping on the Hydrogen Storage Performance of Ti1.02Cr1.1Mn0.3Fe0.6 Alloy for Hybrid Hydrogen Storage Application

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Effect of different metal element substitution on microstructural and comprehensive hydrogen storage performance of Ti0·9Zr0·1Mn0·95Cr0·7V0.2M0.15 (M = Fe, Co, Ni, Cu, Mo) alloy

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Hydrogen storage capabilities of the alloys Fe 0.85Mn 0.15Ti 0.9M 0.1 (M=Zr, V, Ca)

Hydrogen storage properties of TiMn2-based alloys

Microstructure and Electrochemical Properties of V_(2.1)TiNi_(0.4)Zr_(0.06)Cu_(0.03)M_(0.10)(M=Cr, Co, Fe, Nb, Ta) Hydrogen Storage Alloys

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

The Effects of Partial Substitution of Mn by Cr on the Phase Structure, Microstructure and Electrochemical Properties of Ti-Zr-V-Mn-Ni Hydrogen Storage Alloys

Influence of Fe Content on the Microstructure and Hydrogen Storage Properties of Ti16Zr5Cr22V57−xFex (x = 2–8) Alloys

Hydrogen Storage Properties Of(ti 0.85 Zr 0.15 ) 1.05 Mn 1.2 Cr 0.6 V 0.1 M 0.1 （m=ni,fe,cu） Alloys Easily Activated at Room Temperature

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions

Effect of Mn Substitution for Co on the Structural, Kinetic, and Thermodynamic Characteristics of ZrCo1−Mn (x=0–0.1) Alloys for Tritium Storage

Effect of Zr Content on the Microstructures and Hydrogen Storage Properties of (Ti-Cr)_(45-x)V_(55)Zr_x(x=1～7) Alloys

Effects of Partial Substitution of Fe for Cr on Hydrogen Storage Performance of TiVCrMn Alloys

Hydrogen storage performances, kinetics and microstructure of Ti<sub>1.02</sub>Cr<sub>1.0</sub>Fe<sub>0.7-x</sub>Mn<sub>0.3</sub>Al<su b>x</sub> alloy by Al substituting for Fe

Influence of the Substitution Cr for Mn on Structural and Hydrogen Storage Performance of Ti 0.9 Zr 0.1 V 0.45 Cr X Mn 1.5-X (x=0, 0.05, 0.1, 0.15, 0.2) Alloys

Effect of zr content on the microstructures and hydrogen storage properties of (Ti-Cr)(45-x)V55Zrx (x=1 similar to 7) alloys