Abstract:Additive manufacturing technology, specifically digital light processing (DLP) based vat photopolymerization (VPP), is extensively employed for fabricating complex constructs. Nevertheless, the accuracy of DLP-VPP is hindered by challenges such as light diffraction during propagation and light penetration along the exposure axis within the photopolymeric resin. To mitigate these issues, regulating the grayscale of projected mask images offers a reliable approach to reduce undesired curing. In this study, we introduce a voxel-based multi-layer solidification model to predict the exposure dose distribution of printed parts. Based on this model, we propose a pixel-level grayscale optimization method using the gradient descent technique. This method allows us to control the accumulated exposure dose of each voxel by modifying the grayscale of individual pixels in the projected mask images, thereby improving the accuracy of the printed parts. To validate our optimization method, we conducted a series of experiments involving the printing of four representative structures using both the traditional method and our proposed optimization method. The results demonstrate that the structures produced using our optimization method exhibit superior consistency with the target geometry. This indicates a significant improvement in accuracy achieved through our optimization technique. Furthermore, our optimization method has successfully enabled the fabrication of microchannels that are previously unattainable using traditional method. This achievement highlights the immense potential of our optimization method in the realm of printing microchannels.

Comprehensive and Quantitative Characterization and Analysis Method of 3D Mask Effect for Lithography Simulation

Light and Matter Co-Confined Multi-Photon Lithography

ILT Approach for Compensating 3-D Mask Effects

Rigorous Simulation of 3D Masks

Lithography printability review: an application on advanced photomask production for enhancing mask yield and cycle time

Mask model analysis and its application in 28 OPC modeling

Rigorous Simulations of 3D Patterns on Extreme Ultraviolet Lithography Masks

Ray Ellipse Method of Analyzing the Power and Polarization State of Partially Polarized Light

A highly effective and efficient cost-function-reduction method for inverse lithography technique

Optimal Polarization Modulation for Orthogonal Two-Axis Lloyd’s Mirror Interference Lithography

Efficient Mask Design for Inverse Lithography Technology Based on 2D Discrete Cosine Transformation (DCT)

Source and Mask Co-Optimization Using A Gradient Based Method in Optical Lithography

Proximity Effect In Electron Beam Lithography

Effect of Coating-Induced Polarization Aberrations on the Focusing Properties in High Numerical Aperture Optical System

Highly Parallel Rigorous Simulations of Phase-Shift Masks with a Generalized Eigen-Oscillation Spectral Element Method

Optimize projected mask images for improving three-dimensional printing accuracy for digital light processing based vat photopolymerization

The Research on Alternating Phase-shifted Mask Design of 100 Nm Resolution

Lithography mask thermal and stress effect for the machine overlay compensation

Edge-based near-field photolithography optical proximity effect correction technique

Computational study of 3-dimensional photo lithography on limitations and possibility for novel structures

Development of a Lithography Simulation Tool Set in Various Optical Conditions for Source Mask Optimization