Abstract:In order to improve the performance of AC variable frequency adjustable speed system,a new current polarity detection method is proposed,which is used to compensate the inverter output voltage error caused by the dead time and the non-ideal characteristic of the switch devices.The zero-crossings of the three-phase currents are forecasted in terms of detecting the zero-crossing of two-phase current difference,for example phase A and phase B.Together with the message of phase A current polarity detected at the time of zero-crossings of the two-phase current difference,the current polarities of three-phase at arbitrary moment can be achieved.This method avoids the zero-current clamped phenomenon,and the zero-crossing detection precision is not affected by the odd harmonics.Based on the above polarity detection results,the voltage error produced by the dead time and the non-ideal switching characteristic of IGBT is compensated in an induction motor indirect self control(ISC)system.The compensation of the three-phase voltages are implemented by calculation of the equal time of the voltage error and the feed-forward control of duty cycles of three-phase reference voltages in the real system.Some experiments are carried out,and the experiment results with and without compensation are compared.It shows that the performance of the system is remarkably improved with the proposed method.

Online Inverter Nonlinearity Compensation Method Based on Current Injection

An Online VSI Error Parameter Identification Method for Multiphase IM with Non-Sinusoidal Power Supply

An Accurate VSI Nonlinearity Modeling and Compensation Method Accounting for DC-Link Voltage Variation Based on LUT

Online Compensation Strategy on Nonlinear Voltage for SPMSM Based on Adaptive Parameter Estimation

Current Measurement Error Compensation Based on Modified Multiple Complex-Coefficient Filters in PMSM Drives

Compensation of Current Measurement Error in PMSM Drives Based on Virtual Windings

A Look-Up Table Based Inverter Nonlinearity Compensation Method Considering Parameter Inconsistency of Upper and Lower Bridge Arms

Offline Identification of VSI Nonlinearity at Arbitrary Initial Angles based on Inverter Modeling

The Analysis and Compensation of Voltage Source Inverter Nonlinearity

Compensating Inverter Output Voltage Error Based on Two-Phase Currents Difference Detection

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Current Injection-Based VSI Nonlinearity Self-learning Method for Dual Three-Phase PMSM Drives Considering the Effect of Zero-axis Voltage

Accurate inverter error compensation using self-tuning stator current estimation error in sensorless induction motor drives

Automeasurement of the Inverter Output Voltage Delay Curve to Compensate for Inverter Nonlinearity in Sensorless Motor Drives

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

A New Inverter Compensation Strategy Based On Adjusting Dead-Time On-Line

Control Strategy of Non-Linear Discrete Time-Optimal Error Feedback in PV Grid-Connected Inverter

Model Predictive Direct Speed Control of Permanent-Magnet Synchronous Motors with Voltage Error Compensation

ILC-Based Voltage Compensation Method for PMSM Sensorless Control Considering Inverter Nonlinearity and Sampling Current DC Bias

Modeling and Research of Three-Phase Inverter Powering Nonlinear Load

SiC-MOSFET Three Phase Unbalance Compensation Device with Interleaved Parallel Structure