Abstract:In order to improve the performance of AC variable frequency adjustable speed system,a new current polarity detection method is proposed,which is used to compensate the inverter output voltage error caused by the dead time and the non-ideal characteristic of the switch devices.The zero-crossings of the three-phase currents are forecasted in terms of detecting the zero-crossing of two-phase current difference,for example phase A and phase B.Together with the message of phase A current polarity detected at the time of zero-crossings of the two-phase current difference,the current polarities of three-phase at arbitrary moment can be achieved.This method avoids the zero-current clamped phenomenon,and the zero-crossing detection precision is not affected by the odd harmonics.Based on the above polarity detection results,the voltage error produced by the dead time and the non-ideal switching characteristic of IGBT is compensated in an induction motor indirect self control(ISC)system.The compensation of the three-phase voltages are implemented by calculation of the equal time of the voltage error and the feed-forward control of duty cycles of three-phase reference voltages in the real system.Some experiments are carried out,and the experiment results with and without compensation are compared.It shows that the performance of the system is remarkably improved with the proposed method.

The Analysis and Compensation of Voltage Source Inverter Nonlinearity

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

Online Inverter Nonlinearity Compensation Method Based on Current Injection

Accurate inverter error compensation using self-tuning stator current estimation error in sensorless induction motor drives

Analysis and Compensation Method of Dead Time Effect for Space Vector PWM Inverter

Control Methods to Improve Virtual Power Angle Transient Stability of Droop-Controlled Inverters

An Accurate VSI Nonlinearity Modeling and Compensation Method Accounting for DC-Link Voltage Variation Based on LUT

Compensating Inverter Output Voltage Error Based on Two-Phase Currents Difference Detection

Dead-time Effects Analysis and Elimination for Voltage Source Inverter

Automeasurement of the Inverter Output Voltage Delay Curve to Compensate for Inverter Nonlinearity in Sensorless Motor Drives

ILC-Based Voltage Compensation Method for PMSM Sensorless Control Considering Inverter Nonlinearity and Sampling Current DC Bias

Modeling and Research of Three-Phase Inverter Powering Nonlinear Load

An Online VSI Error Parameter Identification Method for Multiphase IM with Non-Sinusoidal Power Supply

A Look-Up Table Based Inverter Nonlinearity Compensation Method Considering Parameter Inconsistency of Upper and Lower Bridge Arms

Inverter Nonlinear Error Compensation Using Feedback Gains and Self-Tuning Estimated Current Error in Adaptive Full-Order Observer

An Accurate Power-flow Control Method with Harmonic Compensation in Voltage-source-inverter Grid-tied System

Linearization Equivalent Model Study of IIDG Fault Output with Low Current Limiting

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

Dead-time Compensation of Space Vector PWM Inverter for Induction Motor

Research of V/f Control Method for Multiphase Induction Motor with Non-sinusoidal Supply at Low Speed

Online Compensation Strategy on Nonlinear Voltage for SPMSM Based on Adaptive Parameter Estimation