Abstract:Schematic of desizing and fabrication process and IFSS properties of CFF/PEEK composites. Carbon fiber fabrics reinforced polyether ether ketone (CFF/PEEK) composites show extraordinary mechanical properties which deeply relay on their interfacial properties. Herein, two simple desizing method of acetone and high‐temperature were used to remove sizing agent of CFF. The fiber surface roughness and surface activity increased after desizing, which enhances interfacial wettability between fiber and resin. The interface shear strength (IFSS) measured by micro‐bond test was used to evaluated the interfacial properties. After desizing, the IFSS enhanced from 41.7 to 51.2 MPa, which may be owing to enhanced of interfacial adhesion and mechanical locking between CFF and PEEK. CFF/PEEK laminates were fabricated by a simple film stacking method using hot‐pressing process of CFF and PEEK film. Interlaminar shear strength (ILSS) tested by short‐beam method increased from 62.5 to 71.3 MPa, and flexural strength increased from 754.4 to 805.5 MPa, which indicated the fiber‐matrix interface enhanced. Furthermore, forming quality and microscopic failure modes of CFF/PEEK verified fiber‐matrix interface enhanced after removing sizing agent. The interfacial and mechanical properties of CFF/PEEK composites significantly enhanced by using simple and effective desizing method. This study is expected to provide valuable insights into optimizing fiber surface treatments for enhancing durability and reliability of advanced composite materials. Highlights Acetone and high‐temperature desizing were used to remove sizing agent of CFF. The IFSS of treatment CFF increased over 25% compared with untreated ones. The ILSS and flexural strength of desizing‐CFF/PEEK enhanced notably. The fiber‐matrix interface between desizing‐CFF and PEEK resin enhanced.

Preparation of Glass Fiber/Poly(Ether Ether Ketone) Composite Foam with Improved Compressive Strength and Heat Resistance

Microextrusion Foaming of Polyetheretherketone Fiber: Mechanical and Thermal Insulation Properties

Boosting solubility performance of supercritical CO 2 via ethanol toward fabrication of polyetherimide/carbon fiber composite foam with three‐dimensional geometry shape

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Study on the Preparation and Process Parameter-Mechanical Property Relationships of Carbon Fiber Fabric Reinforced Poly(Ether Ether Ketone) Thermoplastic Composites

3D orthogonal woven carbon fiber/PEEK composites with superior bending and flame-retardant properties

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Preparation of CF/PEEK Composites with High Mechanical Performance Using PEEK Derivatives as the Sizing Agent

Mechanical properties, biosafety, and shearing bonding strength of glass fiber-reinforced PEEK composites used as post-core materials

Superior strength in the 3D ‐printed polyether‐ether‐ketone composites reinforced by annealing and carbon fibers

Progress in the Preparation Process and Application of Carbon Fiber Reinforced PEEK Composites

Carbon fibre/graphene foam/polymer composites with enhanced mechanical and thermal properties

Superlight flame-retardant poly(aryl ether ketone)/polyurea nanocomposite foam with excellent solvent-resistance and shape memory performance

High-content continuous carbon fibers reinforced PEEK matrix composite with ultra-high mechanical and wear performance at elevated temperature

High-performance Polyphenylene Sulfide Composites with Ultra-High Content of Glass Fiber Fabrics

Ultralow Dielectric Constant Polyarylene Ether Nitrile/Polyhedral Oligomeric Silsesquioxanes Foams with High Thermal Stabilities and Excellent Mechanical Properties Prepared by Supercritical CO 2

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide

Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone (PEEK) composites

Study on the effect of fiber‐matrix interface on mechanical response of carbon fiber fabrics reinforced polyether ether ketone composites

Fabrication of Polyether–Ether–Ketone Foams with Superior Properties and Mitigated Weld Lines by Microcellular Injection Molding

Thermal insulation and mechanical properties of carbon fiber‐reinforced thermoplastic polyphthalazine ether sulfone ketone composites reinforced by hollow glass beads