Abstract:Schematic of desizing and fabrication process and IFSS properties of CFF/PEEK composites. Carbon fiber fabrics reinforced polyether ether ketone (CFF/PEEK) composites show extraordinary mechanical properties which deeply relay on their interfacial properties. Herein, two simple desizing method of acetone and high‐temperature were used to remove sizing agent of CFF. The fiber surface roughness and surface activity increased after desizing, which enhances interfacial wettability between fiber and resin. The interface shear strength (IFSS) measured by micro‐bond test was used to evaluated the interfacial properties. After desizing, the IFSS enhanced from 41.7 to 51.2 MPa, which may be owing to enhanced of interfacial adhesion and mechanical locking between CFF and PEEK. CFF/PEEK laminates were fabricated by a simple film stacking method using hot‐pressing process of CFF and PEEK film. Interlaminar shear strength (ILSS) tested by short‐beam method increased from 62.5 to 71.3 MPa, and flexural strength increased from 754.4 to 805.5 MPa, which indicated the fiber‐matrix interface enhanced. Furthermore, forming quality and microscopic failure modes of CFF/PEEK verified fiber‐matrix interface enhanced after removing sizing agent. The interfacial and mechanical properties of CFF/PEEK composites significantly enhanced by using simple and effective desizing method. This study is expected to provide valuable insights into optimizing fiber surface treatments for enhancing durability and reliability of advanced composite materials. Highlights Acetone and high‐temperature desizing were used to remove sizing agent of CFF. The IFSS of treatment CFF increased over 25% compared with untreated ones. The ILSS and flexural strength of desizing‐CFF/PEEK enhanced notably. The fiber‐matrix interface between desizing‐CFF and PEEK resin enhanced.

Study on the effect of fiber‐matrix interface on mechanical response of carbon fiber fabrics reinforced polyether ether ketone composites

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Effect of carbon fiber surface properties on carbon fiber/polyphenylene sulfide composite interfacial property

Interfacial performance and build orientation of 3D‐printed poly(ether‐ketone‐ketone) reinforced by continuous carbon fiber

Effect of polyetherimide sizing on surface properties of carbon fiber and interfacial strength of carbon fiber/polyetheretherketone composites

Enhanced Interfacial Strength of Carbon Fiber/peek Composites Using a Facile Approach Via PEI&ZIF-67 Synergistic Modification

Strong Interface Construction of Carbon Fiber-reinforced PEEK Composites: An Efficient Method for Modifying Carbon Fiber with Crystalline PEEK

Effects of polyetherimide sizing involving carbon nanotubes on interfacial performance of carbon fiber/polyetheretherketone composites

Study on the Preparation and Process Parameter-Mechanical Property Relationships of Carbon Fiber Fabric Reinforced Poly(Ether Ether Ketone) Thermoplastic Composites

Epoxy Laminated Composites Reinforced with Polyethyleneimine Functionalized Carbon Fiber Fabric: Mechanical and Thermal Properties

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Interfacial adhesion enhancement in high‐modulus carbon fiber/poly (ether ether ketone) composites: through the flexible macromolecule‐grafted‐carbon nanotubes sizing treatment

Improving the Interfacial Adhesion of Long Carbon Fiber-Reinforced Polyamide 6 Composites by Electrochemical Oxidation and Polyethylenimine-Carboxymethyl Cellulose Grafting

Effect of Electrochemical Aryl Diazonium Salt Modification on Interfacial Properties of CF/PEEK Composites

Preparation of CF/PEEK Composites with High Mechanical Performance Using PEEK Derivatives as the Sizing Agent

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Enhancing the interfacial strength of carbon fiber/epoxy composites by introducing “rigid-flexible” structure onto carbon fiber surface via π–π interaction

A "sizing-free" strategy to improve the interfacial property of PEEK/CF composites based on "grafting-bridging" bifunctional diazonium salt

Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization

Effect of electrochemical anodic oxidation modification on the interfacial properties of carbon fiber reinforced polyimide composites

Constructing a Superior Interfacial Microstructure on Carbon Fiber for High Interfacial and Mechanical Properties of Epoxy Composites