Abstract:Since the polyethylene terephthalate (PET)/hollow glass beads (HGB) composite has a longer relaxation time than pure PET, the corresponding aggregates made of PET chains and HGBs are expected to have larger characteristic sizes compared to PET and HGB. A composite of polyethylene terephthalate (PET) and hollow glass beads (HGB) with two different HGB sizes was prepared and investigated rheologically. When the HGB content reaches approximately 30 wt%, the PET/HGB composite changes from a Newtonian fluid to a pseudoplastic one within the measured frequency range. If the HGB content is below the critical value, the viscosity of the composite may be lower than that of the neat PET melt. This is because scrolling or sliding of the HGB in the PET melt increases the apparent shear rate and reduces the torque measured by the rheometer rotor. Meanwhile, the size of the HGB affects the viscosity of the composite. The 40 μm HGB has a more pronounced effect, resulting in higher viscosity than 50 μm HGB. Furthermore, the composite containing 40 μm HGB has a lower density than the one containing 50 μm HGB. This is because the 40 μm HGB has a lower breaking rate and higher volume fraction compared to the 50 μm HGB at the same mass fraction. The peak relaxation time of the PET/HGB composite increases with the HGB content, and higher temperatures correspond to shorter relaxation times. DSC analysis showed that the addition of HGB filler decreased the melting temperature and increased the crystallization temperature of the PET material. Since the PET/HGB composite has a longer relaxation time than pure PET, the corresponding aggregates made of PET chains and HGBs are expected to have larger characteristic sizes compared to PET and HGB. These sizes can be determined approximately using a grid drawing method. The coupling agent CS‐101 enhances the bonding between PET and HGB. This is evidenced by comparing the viscosity curves of the composite with and without the coupling agent. Highlights The polyethylene terephthalate (PET)/hollow glass beads (HGB) composites with low levels of HGB might exhibit unusual viscosity. Abnormal viscosity in molten PET occurs due to the rolling or sliding of HGB. The composites with high HGB levels may exhibit a solid‐like modulus plateau. The proposed aggregate consists of PET, HGB, and broken glass shards.

Thermal insulation and mechanical properties of carbon fiber‐reinforced thermoplastic polyphthalazine ether sulfone ketone composites reinforced by hollow glass beads

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Optimizing the Thermal Properties of Fiber Reinforced Phthalonitrile Composites

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Studies on mechanical properties, thermal degradation, and combustion behaviors of poly(1,4-butylene terephthalate)/glass fiber/cerium hypophosphite composites

A Novel Function-Designed Carbon Fiber Reinforced Polymer with Implanting Expanded Graphite/paraffin Composite into Interlayers: Mechanical, Thermal and Sustainable Properties Analysis

Preparation and Research of Thermally Conductive PBT/CF Composites

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Thermally Conductive Polypropylene/Graphite/Carbon Fiber Composites

Rheological investigation on polyethylene terephthalate (PET) filled with hollow glass beads

Research on properties of composite based on polyether sulfone/cyanate ester semi‐interpenetrating resin system

The Effect of Hybrid Thermal Fillers on Thermal Conductivity of Carbon Fiber Reinforced Polybutylene Terephthalate Composites

Crystallization Behavior and Properties of Glass Fiber Reinforced Polypropylene Composites

Crystal Behavior and Mechanical Properties of PP Composites Filled with Carbon Black Grafted by Organic Small Molecules

Graphite films/carbon fiber fabric/polyurethane composites with ultrahigh in-plane thermal conductivity and enhanced mechanical properties

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Polyethylene Glycol/modified Carbon Foam Composites for Efficient Light-Thermal Conversion and Storage

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

Investigation on Thermal Properties of Heat Storage Composites Containing Carbon Fibers

Thermal Behavior of Composite Phase Change Materials Based on Polyethylene Glycol and Expanded Vermiculite with Modified Porous Carbon Layer

Inter‐tow toughness modification of carbon fiber reinforced cyanate resin matrix composites