Abstract:Utilization of sintered red mud to optimize the extraction of Al2O3 and the preparation of PAFS water purification agents is reported. The proposed process achieves a significant reduction in red mud volume, maximizes the separation efficiency of Al2O3, and converts residual aluminum and iron elements water treatment agents. The process parameters for comprehensive utilization are thoroughly investigated, along with evaluating the efficacy of fabricated PAFS materials. By employing an "alkali calcination‐water leaching" integrated extraction technique, the separation of aluminum and iron components in red mud is achieved through the extraction of aluminum oxide and the preparation of polymeric aluminum iron sulfate (PAFS) water treatment agent. Basic characteristics of raw material red mud were characterized. The process parameters of activation calcination, leaching, and preparation of water treatment agent were determined. The prepared PAFS was characterized in terms of its fundamental properties and waste water treatment capacity. Results showed that the content of Al2O3 and Fe2O3 in red mud was 12.98 % and 6.09 %, respectively, distributed in the amorphous phase, while SiO2 and CaO existed in form of feldspar, calcite, and calcium silicate. During calcination stage, use NaOH as the activation medium, over 43 % Al2O3 could be extracted under the optimal activation and leaching process parameters. After acid leaching of the water‐leached residue, PAFS water treatment agent was prepared by utilizing the resultant acid leaching solution with NaOH as PH regulator. By optimizing the process parameters for preparation, an impressive turbidity removal rate of 97.52 % was achieved for the resulting PAFS. This study presents a viable approach for achieving significant reduction and maximizing the value‐added utilization of red mud.

Red Mud-Based Polyaluminium Ferric Chloride Flocculant: Preparation, Characterisation, and Flocculation Performance

Red Mud-Based Polyaluminum Ferric Chloride Flocculant: Preparation, Characterization and Flocculation Performance

Preparation and Application of Slag Compound Flocculant

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Study on Leaching at the Early Stage of Highly Efficient Flocculants

Coagulation performance and mechanism of polyaluminum ferric chloride (PAFC) coagulant synthesized using blast furnace dust

Novel Polyaluminum Ferric Chloride Composite Coagulant from Bayer Red Mud for Wastewater Treatment

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

A Novel Method of Synthesizing Polymeric Aluminum Ferric Sulfate Flocculant and Preparing Red Mud-Based Ceramsite

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Flocculation Performance of PCFA Composite Coagulant for Removing Nanoparticles

Extraction of Aluminum and Preparation of Polymerized Aluminum Ferric Sulfate from Red Mud

Production of Polyaluminum Ferric Chloride from Blast Furnace Dust

Synthesis, purification and characterization of polyaluminum ferric chloride (PAFC) with high (Al+Fe) b content

Preparation and Application of Polyaluminum Ferric Sulfate from Red Mud: Behaviors of Leaching, Polymerizing, and Coagulation

High-efficiency leaching of Al and Fe from fly ash for preparation of polymeric aluminum ferric chloride sulfate coagulant for wastewater treatment

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride

Research and Application of Gangue for the Preparation of Polymerized Aluminum Magnesium Chloride Flocculant

Preparation of Composite Inorganic Polymer Coagulant of Polymeric Aluminum Ferric Chloride Reusing Kaolin Tailings

Preparation and Applications of Inorganic Polymer Flocculant Poly Aluminum Ferric Sulfate

Synthesis of PSAFS Using Bayer Red Mud and Its Flocculation Effect Evaluation