Abstract:Recent advance on the application of the composite coagulant in the coagulation–flocculation process has attracted a widespread interest. Previous research has demonstrated that iron-based composite coagulant could enhance the performance of the coagulation–flocculation. In this research, results of an experimental study using polymeric aluminum ferric sulfate (PAFS) as a modified coagulation reagent for treating wastewater was presented. The structure and morphology of PAFS were investigated using some conventional methods, and response surface method (RSM) was employed to optimized the coagulation–flocculation process while the evaluation of treatment efficiency was determined by measuring both the reduction of turbidity and chemical oxygen demand (COD). In addition, parameters affecting coagulation–flocculation behavior such as coagulant dosage, wastewater initial pH, were also examined. The results showed the structure of PAFS as a non-stoichiometric basic iron sulfate salt taking the shape of a compact network and exhibited better coagulation–flocculation performance when the species distribution of (Fe–Al)a, (Fe–Al)b and (Fe–Al)c in PAFS were 37.4%, 3.79% and 59.08%, respectively. Compared with PFS, PAFS showed a superior flocculation performance with the maximum COD removal efficiency of 83.6% and the lowest residual turbidity of 0.96NTU at the coagulant dosage of 45mg/L. In the coagulation–flocculation process, the adsorption-bridging and charge neutralization mechanisms played an important role in colloidal destabilization and aggregation.

Novel Polyaluminum Ferric Chloride Composite Coagulant from Bayer Red Mud for Wastewater Treatment

Preparation and Application of Slag Compound Flocculant

Coagulation performance and mechanism of polyaluminum ferric chloride (PAFC) coagulant synthesized using blast furnace dust

Preparation of a Composite Coagulant: Polymeric Aluminum Ferric Sulfate (PAFS) for Wastewater Treatment

Preparation of Composite Inorganic Polymer Coagulant of Polymeric Aluminum Ferric Chloride Reusing Kaolin Tailings

Red Mud-Based Polyaluminum Ferric Chloride Flocculant: Preparation, Characterization and Flocculation Performance

Red Mud-Based Polyaluminium Ferric Chloride Flocculant: Preparation, Characterisation, and Flocculation Performance

Preparation of inorganic-organic composite coagulants PAFC-PDA and its effects on treating synthetic printing and dyeing wastewater

Evaluation of a Novel Composite Inorganic Coagulant Prepared by Red Mud for Phosphate Removal

Characterization and coagulation–flocculation behavior of polymeric aluminum ferric sulfate (PAFS)

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

Optimization of Preparation and Application of Polymeric Aluminum Ferric Sulfate Coagulant by Response Surface Analysis

A novel preparation method of polyaluminum chloride/polyacrylamide composite coagulant: Composition and characteristic

Synthesis, purification and characterization of polyaluminum ferric chloride (PAFC) with high (Al+Fe) b content

Application of Composite Pre-Polymerized Coagulants for the Treatment of High-Strength Industrial Wastewaters

An enhanced coagulation using ferric chloride and poly-ferric chloride coagulant assisted by polyamidine: Performance and mechanisms

Preparation of Polymeric Aluminum Ferric Silicate for the Pre-Treatment of Oily Wastewater Through Response Surface Method

Preparation of Coagulant from Red Mud and Semi-Product of Polyaluminum Chloride for Removal of Phosphate from Water

Preparation of a Novel Inorganic-Biological Composite Flocculant for the Removal of Turbidity and Organic Matter in the Surface Water

Novel Multiple Coagulant from Bayer Red Mud for Oily Sewage Treatment

Electroplating Wastewater Treatment by Polyaluminum Ferric Chloride