Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Simulation analysis of power battery module under extrusion condition

Deformation Analysis on In-Plane Loading of Prismatic Cell

Numerical Simulation Analysis of Power Battery Chassis of Electric Car

Crashworthiness Analysis of Electric Vehicle With Energy-Absorbing Battery Modules

Crush and crash analysis of an automotive battery-pack enclosure for lightweight design

Optimization and Structural Analysis of Automotive Battery Packs Using ANSYS

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Modeling and Dynamic Impact Analysis of Prismatic Lithium-Ion Battery

Strength analysis of the lightweight-designed power battery boxes in electric vehicle

Mechanical performance study and simulation of aluminum-plastic film in pouch Lithium-ion battery based on ductile fracture criterion

An integrated cell-to-pack design based on an origami sandwich structure to enhance cooling and mechanical performances of battery packs in electric vehicles

Dynamic behavior prediction of modules in crushing via FEA-DNN technique for durable battery-pack system design

Experiments and 3D detailed modeling for a pouch battery cell under impact loading

Experimental and Simulation Modal Analysis of a Prismatic Battery Module

Study on the Battery Safety in Frontal Collision of Electric Vehicle

Deformation and Failure of Lithium-Ion Batteries Treated As a Discrete Layered Structure

On crashworthiness design of hybrid metal–composite battery-pack enclosure structure

Plasticity Analysis and a Homogenized Constitutive Model of Compressible Multi-Layer Structure of Battery

Damage Assessment Method of Battery Pack of Electric Vehicle in Undercarriage Collision

Optimization of automotive battery pack casing based on equilibrium response surface model and multi-objective particle swarm algorithm

Safety Performance and Failure Criteria of Lithium-Ion Batteries under Mechanical Abuse