Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Numerical Simulation Analysis of Power Battery Chassis of Electric Car

Electro-Thermal Modeling of a Hollow Structure Design of Cylindrical Lithium-Ion Battery

Heating Strategy for Electric Vehicular Battery Pack Based on CFD Analysis

Numerical Investigation on Optimal Design of Battery Cooling Plate for Uneven Heat Generation Conditions in Electric Vehicles

Optimization and Structural Analysis of Automotive Battery Packs Using ANSYS

Experimental and Simulation Modal Analysis of a Prismatic Battery Module

Finite element modeling of electric vehicle power battery pack and its influence analysis and test research at body-in-white stage

Integrated Crashworthiness Analysis of Electric Vehicle Battery Shells and Chassis: A Finite Element Study with Abaqus

Crashworthiness Analysis of Electric Vehicle With Energy-Absorbing Battery Modules

Finite Element Analysis and Structural Optimization Research of New Energy Vehicle Battery Box

Study on the Battery Safety in Frontal Collision of Electric Vehicle

Damage Assessment Method of Battery Pack of Electric Vehicle in Undercarriage Collision

Lightweight design and static strength analysis of battery box for electric vehicle

Analytical Analysis of Electric Vehicle Chassis Frame and Battery Thermal Management System

Simulation analysis of air cooling for vehicle power battery

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Simulation and Analysis of the Temperature Rising for Cylindrical Power Batteries

Analysing Vibration Environment of a Power Battery in a Running Electric Vehicle

Deformation Analysis on In-Plane Loading of Prismatic Cell

Design and Analysis of Battery Bracket Structures for Different Vehicles

Comprehensive Performance Evaluation Strategy for Power Battery System based on Dynamic Weight