Abstract:This work develop a durable polymer solid‐state electrolyte by utilizing a nanofiber WPI framework. Attribute to the formation of hydrogen bonds, WPI membrane achieves tensile strength of 12.2 MPa. When integrated with a polyethylene oxide (PEO)–succinonitrile (SN)–lithium bis(trifluoromethane)sulfonimide (LiTFSI) electrolyte, the PEO/SN/LiTFSI‐WPI cell exhibits a capacity retention ratio of 94.6% after 100 cycles at 0.3 C and 30 °C. Incorporating a water‐immersed polyimide membrane (WPI) as a framework into a polymer electrolyte PEO/SN/LiTFSI (PSL) can address the challenges faced by solid‐state polymer electrolytes in practical applications for all‐solid‐state lithium‐ion batteries (ASSLIBs) used in flexible and wearable electronics. The inferior mechanical performance and inadequate ionic conductivity of polymer electrolytes have hampered their widespread use. By utilizing a matrix of polyethylene oxide (PEO) along with succinonitrile (SN) and lithium bis(trifluoromethane)sulfonimide (LiTFSI) as additives, the WPI enhances the stability of the PSL electrolyte structure through reinforced internal hydrogen bonds of poly(amic acid), its precursor, post‐thermal imidization in the presence of deionized water. This structural enhancement leads to improved mechanical properties, evidenced by a tensile strength of 12.2 MPa at a high porosity of 85.6%. The WPI‐PSL electrolyte exhibits favorable ionic conductivity, thermal stability, and electrochemical compatibility with lithium metal. As a result, the WPI‐PSL configuration demonstrates exceptional performance in a LiFePO4/Li ASSLIBs system, showcasing outstanding cycling performance at both 30 and 60 °C, with capacity retention ratios reaching 94.6% and 96% after 100 cycles at 0.3 C, respectively. This research significantly advances the development of polymer solid‐state electrolytes, propelling their use in flexible power sources for ASSLIBs.

Novel Poly(epichlorohydrin)-Based Matrix for Monolithic Ionogel Electrolyte Membrane with High Lithium Storage Performances

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

Lithium ion conducting gels containing porous PVDF-HFP matrix filled with crosslinked PEG

Monolithic Task‐Specific Ionogel Electrolyte Membrane Enables High‐Performance Solid‐State Lithium‐Metal Batteries in Wide Temperature Range

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Preparation and characterization of a novel microporous PE membrane supporting composite gel polymer electrolyte

A thermostable ionic liquid-methacrylate-based polymer electrolyte for energy storage application

An Environmentally Friendly and Economic Membrane Based on Cellulose As A Gel Polymer Electrolyte for Lithium Ion Batteries

Preparation and Study of a Simple Three-Matrix Solid Electrolyte Membrane in Air

Deformable and Flexible Electrospun Nanofiber-Supported Cross-Linked Gel Polymer Electrolyte Membranes for High Safety Lithium-Ion Batteries

Excellent Polymerized Ionic-Liquid-Based Gel Polymer Electrolytes Enabled by Molecular Structure Design and Anion-Derived Interfacial Layer

Regulated solvation structure and solid electrolyte interfaces via imidazolium ionic gel electrolytes with high Li-ion transference number for Li-metal batteries

Imidazolium-Type Poly(ionic liquid) Endows the Composite Polymer Electrolyte Membrane with Excellent Interface Compatibility for All-Solid-State Lithium Metal Batteries

A Sandwich PVDF/HEC/PVDF Gel Polymer Electrolyte for Lithium Ion Battery

Implanting an ion-selective “skin” in electrolyte towards high-energy and safe lithium-sulfur battery

A Solid-State Lithium Battery with PVDF–HFP-Modified Fireproof Ionogel Polymer Electrolyte

A novel polymer electrolyte based on PMAML/PVDF-HFP blend

Design, fabrication and application of PEO/CMC-Li @PI hybrid polymer electrolyte membrane in all-solid-state lithium battery

Deciphering and Integrating Functionalized Side Chains for High Ion-Conductive Elastic Ternary Copolymer Solid-State Electrolytes for Safe Lithium Metal Batteries

Deionized Water Pretreated Polyimide Nanofiber Membranes as Framework for Polymer Electrolytes Applied to Solid‐State Lithium Metal Batteries