Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Design, fabrication and application of PEO/CMC-Li @PI hybrid polymer electrolyte membrane in all-solid-state lithium battery

Li6.4La3Zr1.4Ta0.6O12/Star-Shaped Hybrid Polyhedral Oligomeric Cage Silsesquioxane Polymer Composite Electrolytes for All-Solid-State Lithium Metal Batteries

PEO-LITFSI-SiO<sub>2</sub>-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

A High-Performance Self-Reinforced PEO-Based Blend Solid Electrolyte Membrane for Solid-State Lithium Ion Batteries

PEO/hollow Mesoporous Polymer Spheres Composites As Electrolyte for All Solid State Lithium Ion Battery

A New Solid Polymer Electrolyte Incorporating Li10gep2s12 into A Polyethylene Oxide Matrix for All-Solid-State Lithium Batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

In Situ Polymerized Polydopamine Nanoparticles As Enhanced Polymer Composite Electrolyte for All‐Solid‐State Lithium‐Ion Batteries

Imidazolium-Type Poly(ionic liquid) Endows the Composite Polymer Electrolyte Membrane with Excellent Interface Compatibility for All-Solid-State Lithium Metal Batteries

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

PIM‐1 as a Multifunctional Framework to Enable High‐Performance Solid‐State Lithium–Sulfur Batteries

Three-dimensional Polyimide Nanofiber Framework Reinforced Polymer Electrolyte for All-Solid-state Lithium Metal Battery

Preparation and Study of a Simple Three-Matrix Solid Electrolyte Membrane in Air

Poly(ethylene Oxide)-Li10snp2s12 Composite Polymer Electrolyte Enables High-Performance All-Solid-State Lithium Sulfur Battery

Study on single-ion solid-state polymer lithium-ion electrolyte membranes

Cellulose-Br-Initiated Unique Brush-Like Architectures for Highly Efficient Multifunctional Group Synergistically Regulated Lithium Transfer and Battery Performance of an All-Solid-State Polymer Electrolyte

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Conductivities and Transport Properties of Microporous Molecular Sieves Doped Composite Polymer Electrolyte Used for Lithium Polymer Battery

A Three-Dimensional Co-Continuous Network Structure Polymer Electrolyte with Efficient Ion Transport Channels Enabling Ultralong-Life All Solid-State Lithium Metal Batteries

Synthesis of Single Lithium-Ion Conducting Polymer Electrolyte Membrane for Solid-State Lithium Metal Batteries

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO<sub>2</sub> Nanoparticles for Lithium Metal Batteries