Abstract:A progressively reinforced cathode/electrolyte interphase (CEI) is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on Z‐LCO, i.e. the fluorination of Zr─O and densification of CEI layer driven by the chemical reaction between ZrOxFy and LiF, greatly reinforcing the toughness of CEI containing inorganic species. Consequently, Z‐LCO achieve an enhanced and reversible O3/H1‐3 phase transition and excellent electrochemical performance at 4.6/4.65 V. For LiCoO2 (LCO) operated beyond 4.55 V (vs Li/Li+), it usually suffers from severe surface degradation. Constructing a robust cathode/electrolyte interphase (CEI) is effective to alleviate the above issues, however, the correlated mechanisms still remain vague. Herein, a progressively reinforced CEI is realized via constructing Zr─O deposits (ZrO2 and Li2ZrO3) on LCO surface (i.e., Z‐LCO). Upon cycle, these Zr─O deposits can promote the decomposition of LiPF6, and progressively convert to the highly dispersed Zr─O─F species. In particular, the chemical reaction between LiF and Zr─O─F species further leads to the densification of CEI, which greatly reinforces its toughness and conductivity. Combining the robust CEI and thin surface rock‐salt layer of Z‐LCO, several benefits are achieved, including stabilizing the surface lattice oxygen, facilitating the interface Li+ transport kinetics, and enhancing the reversibility of O3/H1‐3 phase transition, etc. As a result, the Z‐LCO||Li cells exhibit a high capacity retention of 84.2% after 1000 cycles in 3–4.65 V, 80.9% after 1500 cycles in 3–4.6 V, and a high rate capacity of 160 mAh g−1 at 16 C (1 C = 200 mA g−1). This work provides a new insight for developing advanced LCO cathodes.

Constructing Robust Cathode/Electrolyte Interphase for Ultrastable 4.6 V LiCoO2 under-25 degrees C

Constructing Robust Cathode/Electrolyte Interphase for Ultrastable 4.6 V LiCoO 2 under −25 °C

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Superwettable High-Voltage LiCoO2 for Low- Temperature Lithium Ion Batteries

Superwettable High-Voltage LiCoO 2 for Low-Temperature Lithium Ion Batteries

Designing Advanced In Situ Electrode/Electrolyte Interphases for Wide Temperature Operation of 4.5 V Li||LiCoO<sub>2</sub> Batteries

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Reconstruction of LiF-rich interphases through an anti-freezing electrolyte for ultralow-temperature LiCoO<sub>2</sub> batteries

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

Tuning Surface Reconfiguration for Durable Cathode/Electrolyte Interphase of LiCoO<sub>2</sub> at 45 °C

Realizing long-term cycling stability and superior rate performance of 4.5 V–LiCoO2 by aluminum doped zinc oxide coating achieved by a simple wet-mixing method

Cobalt-Doped Spinel Cathode for High-Power Lithium-Ion Batteries Toward Expanded Low-Temperature Applications

Improved Stability of Single‐Crystal LiCoO2 Cathodes at 4.8 V through Solvation Structure Regulation

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance