Abstract:In this Letter, a high-stability, linearly polarized mode-locked polarization-maintaining (PM) E r 3 + -doped fluoride fiber oscillator at ∼ 2.8 µ m is presented for the first time, to the best of our knowledge, where an InAs-based semiconductor saturable absorber mirror is used as the mode locker, and a film polarizer is employed for maintaining the linearly polarized oscillation. In the free-running state, stable linearly polarized mode-locked pulses ( τ = 44 p s and P = 446 m W ) at 2.795 µm, with a high polarization extinction ratio of > 23 d B and a low integrated relative intensity noise of 0.087% [1 Hz–10 MHz], have been achieved, which can be strongly immune to external mechanical perturbations. By introducing a ruled reflective diffraction grating into the cavity in a Littman configuration, the continuous wavelength tuning of the linearly polarized mode-locked pulses in the range of 2717–2827 nm is obtained as well. To the best of our knowledge, this marks the first demonstration of a linearly polarized PM fiber oscillator in the > 2.5 µ m mid-infrared region.

Wavelength-tunable, Linearly Polarized Q-switched and Gain-Switched Polarization-Maintaining Er3+-doped Fluoride Fiber Laser in the Range of 2.7∼2.83 Μm

Linearly Polarized Polarization-Maintaining Er3+-doped Fluoride Fiber Laser in the Mid-Infrared

Tunable High Energy Pulse Generation in the Range of 2.9-3.6 Μ M Enabled by an Actively Q Switched Er3+/Dy3+ Codoped Fluoride Fiber Oscillator

Widely wavelength tunable gain-switched Er<sup>3+</sup>-doped ZBLAN fiber laser around 2.8 μm.

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Tunable high energy pulse generation in the range of 2.9-3.6 μm enabled by an actively Q switched Er3+/Dy3+ codoped fluoride fiber oscillator

2.3 W, Linearly-Polarized Superfluorescent Generation from a Polarization-Maintaining Er3+-Doped Fluoride Fiber Amplifier Around 2.8 Μm

High-stability, Linearly Polarized Mode-Locking Generation from a Polarization-Maintaining Fiber Oscillator Around 2.8 Μm.

Widely Wavelength Tunable Gain-Switched Er^3+-doped ZBLAN Fiber Laser Around 28 Μm

Single-polarization, switchable dual-wavelength erbium-doped fiber laser with two polarization-maintaining fiber Bragg gratings

Linear Polarization-maintaining Fiber Laser Mode-locked by Nonlinear Polarization Evolution

Wavelength-tunable spatiotemporal mode-locking in a large-mode-area Er:ZBLAN fiber laser at 2.8 µm

2.8 Mu M All-Fiber Q-switched and Mode-Locked Lasers with Black Phosphorus

Widely Tunable Passively Q-switched Er 3+ -Doped ZrF 4 Fiber Laser in the Range of 3.4–3.7 Μm Based on a Fe 2+ :Znse Crystal

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Q-switched Er3+/Dy3+ Codoped ZrF4 Fiber Laser: Continuously Tunable Pulse Generation from 3.06 to 3.62 Μm

Femtosecond Laser-Written Small-Period Long-Period Fiber Grating for an L-Band Normal Dispersion Mode-Locked Fiber Laser

Widely Tunable Gain-Switched Er³⁺-Doped ZrF₄ Fiber Laser from 3.4 to 3.7 Μm

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

Efficient 1.6 μm linearly-polarized single-frequency phosphate glass fiber laser

Efficient 16 Μm Linearly-Polarized Single-Frequency Phosphate Glass Fiber Laser